The M60, officially the United States Machine Gun, Caliber 7.62 mm, M60, is a family of American general-purpose machine guns firing 7.62×51mm NATO cartridges from a disintegrating belt of M13 links. 
This model was created for a game set during the Vietnam war, and as such,  I will allow it for download under a non commercial license. It was a very challenging rifle to create, and I learned a lot through the process. 
Tri Count: 55,000
I hope you like it!

M60 Machine Gun - Vietnam War

The Borchardt C-93 (Construktion 93) pistol was designed by Hugo Borchardt (1844–1921) in 1893. Ludwig Loewe & Company of Berlin, Germany, a manufacturer of machine tools, produced the C-93, a semi-automatic pistol that he had invented based upon the Maxim toggle-bolt design. Borchardt also developed the high-velocity bottlenecked 7.65×25mm Borchardt cartridge for the C-93. Borchardt's assistant at the time, Georg Luger, also claimed to have influenced its design. With over 3,000 manufactured by Loewe and Deutsche Waffen und Munitionsfabriken, Borchardt C-93 was the first mass-produced semi-automatic pistol.

Borchardt C93

This is a reproduction of the iconic German rifle of the World War 2. The whole is modeled in Blender and textured in Substance Painter. Lowpoly, optimized for modern game engines. All the textures are provided in 4K.

The MP 40 (Maschinenpistole 40) is a submachine gun chambered for the 9×19mm Parabellum cartridge. It was developed in Nazi Germany and used extensively by the Axis powers during World War II. Designed in 1938 by Heinrich Vollmer with inspiration from its predecessor the MP 38, it was heavily used by infantrymen (particularly platoon and squad leaders), and by paratroopers, on the Eastern and Western Fronts as well as armoured fighting vehicle crews. ~ https://en.wikipedia.org/wiki/MP_40

MP 40 - WW2 Submachine Gun

Made with 3ds Max and Substance Pianter. 

**From wikipedia:**
The StG 45(M) (abbreviation of Sturmgewehr 45, "assault rifle 45") sometimes referred to as the MP 45(M), was a prototype assault rifle developed by Mauser for the Wehrmacht at the end of World War II, using an innovative roller-delayed blowback operating system. It fired the 7.92×33mm Kurz (or "Pistolenpatrone 7.9mm") intermediate cartridge at a cyclic rate of around 450 rounds per minute.

This one is based off the weapon seen in this video: https://youtu.be/NrKhJC35QRA

StG 45(M) / Gerät 06H / MP 45(M)

# About:
Another gun-porn still life featuring a customized M249 SAW, displayed with a set of specialized 5.56×45mm NATO cartridges.
<hr>

  *Іnscription on the ammo box:*
> 
> *"There are people who bring joy. 
> There are people who bring pain. 
> And then there's me, I bring a machine gun."*
<hr>
# Related:
* [**M249 SAW scene (1)**](https://sketchfab.com/3d-models/m249-saw-scene-1-fbab0e48119f47e6882f531ccbc8c074)
* [**M249 SAW (classic)**](https://sketchfab.com/3d-models/m249-saw-scene-1-fbab0e48119f47e6882f531ccbc8c074)
* [**FN Minimi kit**](https://sketchfab.com/3d-models/fn-minimi-kit-891ff4510dc6490fa3a0ab862f61c435)
# [**Ammunition collection**](https://sketchfab.com/leondp/collections/ammunition-e73c6f144c624fee8d93bc2be3d2873f)
<hr>
# Used Software:
* Blender (4.1.1)
* Substance 3D Painter

M249 "SAW" Custom Set + Ammo Pack

This is a scene based on how it was back in the 80's, relaxing days as kids, playing the first NES and its amazing games at night, before dinner, alongside the people who love you in the living room, in a comfy sofa.
Unfortunately, I was not born in that year, but I tried to reimagine on how it was.

This was made in Autodesk Maya and Substance Painter.

This scene, or you could call it a collection, contains:
A plane that is supposed to be part of a room;
An armchair;
A commode/chest of drawers;
A CRT Panasonic TV;
A couple of windows;
Cables all around the room;
The Nintendo Entertainment System;
A couple of games/cartridges lying around;
A couple of boxes from those games lying around;
A couple of Nintendo's famous magazine, Nintendo Power;
The controllers;
The Zapper guns;
The boxes of the controllers and of the NES;
A plug;

Hopefully, a sense of nostalgia to all of you!

Nintendo Entertainment System - 85' Scene

A new form of Rotom, studies indicate that its type varies according to the cartridge in the console.

Textured with a gradient panel, modeled in blender.

For more models of this style visit my profile or stop by my store

You can also support me by giving me a coffee as a gift—https://ko-fi.com/ergoni

****Note: when loading the model in blender, activate the Backface culling option in the material and use the texture in the broadcast channel to achieve this same effect.

Rotom Game Boy

The Norinco M305A is a Chinese variant of the Springfield M14 Rifle
Unlike the M14, the M305A is chambered in 7.62x39mm, it also feeds from 7.62 AK magazines.
While they look identical, some changes were made so the weapon could both feed & fire the new caliber, many “Cosmetic” features of the gun remain the same, allowing the user to use attachments or chassis intended for the original M14 Rifle. 

Features - 
Two Attachment Sets
“Leisure”: AIM SPORTS M1a Scope Mount, HUQ122OR Red Dot
“Marksman”: M305 NDT Mount, TA110 ACOG, Recoil Technologies "Patton" 
Two Cartridges: Yn20 LAP, THOR AP

Modeled in Blender, textured in Substance 3d Painter, Stencils made in GIMP.

Norinco M305A

Multi-cartridge submachine gun based on the *AKS-74U*. Without changing the barrel, it can fire .*380 ACP, 9x18, 9x19, and 9x21 Gyurza* cartridges. With a barrel change, it can also fire *9x30* cartridge. It also uses different bolt carriers depending on the cartridge (there are three sets in total). *Long-stroke piston , 9x21mm Gyurza.*

low-poly Gepard SMG

The Carl Gustaf 20 mm Pvg m/42 or pansarvärnsgevär m/42 is an anti-tank recoilless rifle chambered in 20×180mmR Bofors. This is the first weapon in the Carl Gustaf recoilless weapon family and later turns into the well-known Carl Gustaf 84 mm recoilless rifle. Designed in 1940-1942, Sweden.

This model come with a ZF-4 scope and a fired cartridge behind the breach.

Carl Gustaf 20 mm Pvg m42 (Low-Poly)

The **Malther PPA (Powered Plasma Accelerator) Splintergun** adapted for Project ERYX mission deployment is a compact, high-output sidearm designed for rapid close-to-medium-range annihilation. Instead of conventional projectiles, it fires 30-round micro-cartridges packed with razor-sharp tungsten-iridium splinters. When the trigger is pulled, the gun’s internal accelerator coils superheat each splinter to white-hot plasma in a fraction of a second, turning it into a bolt of charged, molten metal that explodes on impact. Power is supplied through the articulated stabilization arm that plugs directly into your exosuit’s or backpack power cells.
The front plasma accelerator section can be swapped or extended with an SMG repeater kit for sustained suppression or room-clearing.

![Eryxian Open Game Universe](https://res.cloudinary.com/dnfbskuf4/image/upload/v1774012885/eryxian-worldgithub-250_zqm9hk.png)

[Eryxian Universe Lore](https://eryxian.com/)

ERYX Malther PPA Splintergun [Concept]

* -This is P.I.S.A.'s Cleanser Rifle Type II "Juno", the second generation cleanser "sniper".
* -It chambers the 20x195mm "special" MAMP cartridge, in either High Explosive (red tip) or A.S. (white tip), containing a 260g core of Endria for use against Shrike targets.
* -The scope has provisions for an optical connection to a cleanser's Enhanced Premonition Device, allowing operators to take these inputs into account. (Not modelled)
* -Developed and adopted only 14 months post-Rift, It is the standard arm of the designated riflemen cleansers, for use against any range of targets, up to and including Shrikes. 
* 	It was developed by P.I.S.A. and produced and hand-fitted by Richard Heavy Industries in city Juno. It replaced the civilian "Type I" developed by Bellmont, though using a hotter-loaded cartridge.
* -The rifle uses a long recoil action, firing from a closed bolt. It has a capacity of 4 from a single-stack box magazine. It weighs around 53.6kg in its standard configuration.

by ctrl.62 ; no AI used.

20mm Cleanser Anti-Material Rifle

The AMT Automag III is a single action semi-automatic pistol made by Arcadia Machine and Tool (AMT). It was created by Harry Sanford, inventor of the original .44 AutoMag pistol. The Automag III was principally chambered for the .30 Carbine cartridge, which was originally designed for the World War II-era M1 Carbine. It was also one of the few pistols available in the 9mm Winchester Magnum cartridge, but only the original AMT production pistols were made in this chambering, however; later Galena production was limited to .30 Carbine models.[3] The pistol is made of stainless steel and has an 8-round magazine.[4]
(copied from wikipedia)

lowpoly Automag III

The Bendy Valley of Stains Cartridge seen in the main hub in Bendy: Secrets of the Machine. 

I DID NOT MAKE THIS MODEL!!! It comes from: https://store.steampowered.com/app/622630/Bendy_Secrets_of_the_Machine/

All credits to the original creators!

You are free to use this model in your works, projects, etc with no credits required--UNLESS IT CONTAINS:

-NSFW (anything explicit, inappropriate, etc...)
-Anything Monitized (paid projects, crowdfunding, commercial use.)

Bendy VOS Cartridge - Secrets of the Machine

This is a high-detail 3D model of a 7.62 mm NATO Hornady cartridge case, created with accuracy and clean geometry for engineering visualization, simulation, and rendering purposes.

The model captures the realistic proportions and structure of a standard 7.62×51mm NATO casing, making it suitable for educational demonstrations, CAD reference, game assets, and technical visualization.

Designed with attention to detail, this model can be used in:

🔧 Mechanical and aerospace simulations
🎮 Game development and real-time rendering
🎓 Educational and training purposes
🧪 Ballistics visualization and analysis
🎥 High-quality animations and close-up renders

The geometry is optimized for performance while maintaining visual realism, making it ideal for both real-time engines (Unreal, Unity) and high-quality rendering workflows.

If you're working on weapon systems, defense simulations, or physics-based modeling, this asset provides a solid base for integration.

7.62_mm_ Nato_ Hornady_ Case_

The T/C Encore Pro Hunter is a single-shot break-action firearm prized for its exceptional versatility. Its main feature is the ability to quickly swap barrels, allowing one to use the same frame (receiver) for a wide variety of hunting applications, ranging from modern centerfire cartridges to muzzleloading or shotgun barrels.

That’s one of my first models, don’t mind me :)

T/C Encore Pro Hunter

**GameBoy Cartridges: Pokemon Yellow, Zelda DX, Kirby's DreamLand**

For inquiries, please contact me via email: c4m5ron@gmail.com

Or you can message me directly https://www.instagram.com/c4m5ron/

http://c4m5ron.com/

GameBoy Cartridges (Pokemon, Zelda, Kirby)

Replica of the Colt M1911A1 semi-automatic pistol. This 3D model includes a fully modeled chamber and barrel, .45 ACP cartridges, and a 7-round magazine. The entire model contains 42 individual pieces and uses 3 texture sets, each one being 4096x4096.

Pistol and Magazine Tris: 25,780 | Cartridge Tris (bullet and case): 1,098

# [Artstation](https://www.artstation.com/artwork/5WNWE8)

![](https://cdnb.artstation.com/p/assets/images/images/097/681/977/large/edouard-hamon-1911-render-unloaded.jpg?1774894896)
![](https://cdna.artstation.com/p/assets/images/images/097/681/908/large/edouard-hamon-1911-render-interior.jpg?1774894771)
![](https://cdna.artstation.com/p/assets/images/images/097/681/924/large/edouard-hamon-1911-render-closeups.jpg?1774894792)

Colt M1911A1

**Nintendo64 Donkey Kong Game Cartridge**

For inquiries, please contact me via email: c4m5ron@gmail.com

Or you can message me directly https://www.instagram.com/c4m5ron/

http://c4m5ron.com/

N64 Donkey Kong Cartridge

###Cutaway view of a click pen mechanism

This model shows the three main mechanical parts of a retractable pen:

1. *Push button* (with ratchet)

2. *Follower* (spring-loaded by means of the ink cartridge)

3. *Cam*

The complete model of [the pen can be visualized here](https://skfb.ly/SRCn). The animated mechanism can be seen in this [cutaway view](https://skfb.ly/Tq9N) of a retractable pen.

![model 1](https://i.imgur.com/FzSMsJV.png)
![model 2](https://i.imgur.com/v3NsQ4u.png)

*Close-up views of the click pen mechanism (PBR renderings performed with Keyshot 6.1).*

---
🎞️ Don't miss this [Youtube video](https://youtu.be/UbgO2sfWzNg) featuring the 3D model of the retractable pen mechanism.

[![Retractable pen (click pen): How it works](https://img.youtube.com/vi/UbgO2sfWzNg/0.jpg)](https://youtu.be/UbgO2sfWzNg)

Click pen mechanism

For production-ready use, we recommend downloading the original file.The viewer version is intended exclusively for browser preview. In the source file, the following are fully preserved:✔ native scene structure✔ unsimplified materials✔ proper texture maps✔ proper object namingIf you are going to integrate the model into a project, select the original version.The Styer AUG German Armee Universal Gower lit. army universal rifle is an Austrian bullpup assault rifle chambered for the 5.56 45mm NATO intermediate cartridge designed in the 1960s by Steyr Daimler Puch and now manufactured by Styer Arms GmbH Co KG.

Aug Riffle

Famicom cartridge

"Featuring a reciprocating barrel that mitigates the recoil of the devastating .50 Cal cartridge, this anti-material rifle is built for consistent shots on target to take out anything you aim at."

Call of Duty: MWII (2022) - Signal 50

This is a Hunting Rifle that i modelled in Maya and Textured in Substance Painter. This model took around 4 hours to complete and another 2 hours to Unwrap.
The design of the rifle is based of the M24 Rifle that is used in the american army but i decided to give it a more real-world look to it. The overall poly count in maya was 7k but Substance Doubles it when texturing.
**The M24 rifle**
The M24 Sniper Weapon System (SWS) is the military and police version of the Remington Model 700 rifle, M24 being the model name assigned by the United States Army after adoption as their standard sniper rifle in 1988. The M24 is referred to as a "weapon system" because it consists of not only a rifle, but also a detachable telescopic sight and other accessories.

The M24 SWS has the "long action" bolt version of the Remington 700 receiver but is chambered for the 7.62×51mm NATO "short action" cartridge that has an overall length of 2.750 inches (69.85 mm). 


https://en.wikipedia.org/wiki/M24_Sniper_Weapon_System

資源庫

關於這些資源