“THE OBJECT 01” is a 3D-printed chair conceived as both an architectural object and a functional piece of furniture. It sits between minimal brutalism and Japanese restraint, built around proportion, mass, and negative space rather than decoration.⠀
⠀
Printed in recycled PETG with a modular block logic and finished in cold grey which I personally call “Kyoto Fog”. With a weight of 20 kilos, it looks heavier than it is.⠀
⠀
It’s an art statement you can actually use, a sculpture you can sit on indoors or in a park, a small architecture that anchors the room.

License: CC BY-NC-ND
You may download and use this model only for non-commercial purposes and only in its original, unchanged form.
No edits, no re-uploads, no remixes, no retextures, no kitbashing, no conversions (FBX/GLB/etc.) for redistribution.

Credit is required anywhere this model is shown publicly (post/video/portfolio/game credits): Chair/Sculpture Design by Nako Baev

All rights reserved to Nako Baev©

"THE OBJECT 01" by Nako Baev

   1/200 Yamato Battleship for static and RC model step file for 3D printing  ・Total length: 131cm・Full width: 19cm・Total height: 26cm  Large parts printed in FDMSmall parts printed in SLA  I used ABS for hull, but PETG is Ok  Material: PETG, ABSLayer: 0.2Wall: 4Top/Bottom: 5Infill: 15%  Can be painted or coated with epoxy on the outside → 100% waterproof   

1/200 Scale IJN Yamato-Class Battleship –  3D Step file for printing ( RC and static )

The Long Dog House Number Sign  Add personality to your home with this Minimalist Dachshund House Number Sign. A sleek, modern design featuring the iconic long dog silhouette — perfect for dachshund lovers.  Easy to print, clean, and highly customizable, this sign makes your address both stylish and eye-catching.  Printing Info:This model is designed to be clean, fast, and frustration-free to print.  Print it flat on the build plate with no supports needed, ensuring a smooth and reliable result every time. The geometry is optimized for sharp edges and strong structure, making it ideal for both beginners and experienced makers.  For best results:   - Use 0.2 mm layer height - Print in PETG (outdoor use) - Perfect for dual-color prints with a simple filament swap - The final print comes out crisp, durable, and ready to mount — no post-processing required.

The Long Dog House Number Sign

This enclosure is designed for a temperature controller that plugs into a wall outlet and accepts an oven power cord as input. It switches the oven on and off to maintain a user-defined temperature, which can be set using the three buttons on the top of the unit.

The enclosure is intended to be 3D printed in PETG with a minimum of three perimeters (walls) for adequate strength and heat resistance.

Inside the box:

A small PCB with a voltage regulator steps the voltage down from 22V to 12V to power the main control board because I have used a power supply from an old ink jet printer.

The main temperature control board is a commercially available temperature control module (AliExpress).

All screws are M3 countersunk, used with 3.5 mm M3 heat-set inserts.

A small hole near the button openings is provided for the temperature probe wires.

⚠️ The maximum oven power is limited by the relay rating: 2500 W.

oven converter to filament dryer

Elevate your interior decor with this stunning Geometric Spiral Vase. Featuring a sophisticated honeycomb texture and a modern spiral silhouette, this model is specifically engineered for high-quality 3D printing. The design ensures maximum stability with a weighted base and is optimized for support-free printing, making it an ideal project for both beginners and pros. This versatile model is perfect for FDM printers using PLA, PETG, or specialty matte filaments to achieve that elegant emerald look, and it also performs beautifully on large-scale Resin printers. Use it as a standalone art piece or a functional dry flower holder. Print Settings Recommendations: - Layer Height: 0.15mm - 0.25mm - Perimeters: 2-3 for strength - Infill: 10-15% (or use 'Vase Mode' for a decorative version) - Supports: None required - Material: FDM (PLA/PETG) or Resin

Geometric Spiral Honeycomb Vase - No Supports

Keep your workspace tidy and adorable with this Sleeping Baby Elephant Cable Holder. Specifically designed to manage thick charging cables, the elephant’s trunk curls perfectly to grip your cords, preventing them from sliding off your desk. This functional gadget features a sturdy flat base for maximum stability, making it an ideal desktop companion for home offices or bedside tables. Optimized for both FDM and Resin 3D printing, this model looks stunning in matte grey resin or silk PLA. The design is support-free or requires minimal supports depending on your orientation, ensuring a clean and easy post-processing experience. Print Settings Recommendations: - Layer Height: 0.12mm - 0.16mm for fine detail. - Infill: 15-20% (Grid or Gyroid). - Material: PLA, PETG, or Resin. - No supports needed for most well-tuned printers. Perfect as a gift for elephant lovers or anyone looking to upgrade their cable management game with a touch of charm!

Cute Sleeping Elephant Cable Holder & Organizer

колодка для патронов под калибр 12-70 под колличество 10 шт печатается как PLA так и petg

12-70 Versia 2_1

This mount is optimized for Samsung A-series phones, but it can securely clamp many other phones as well. The clamp is designed thicker because it is intended to be used with a phone case.

The clamp base STL is recommended to be printed in PETG, as it is the most mechanically stressed 3D-printed part of the assembly.

Recommended print settings:

Minimum of 3 walls (perimeters)

Minimum of 15% infill

Hardware required:

8 × 25 mm M3 countersunk screws (to help resist pulling stress between layer lines)

2 × 50 mm M3 countersunk screws (for clamping the phone)

8 × 3.5 mm M3 heat-set inserts

2 × 8 mm M3 heat-set inserts

Phone mount for GoPro chest harness

Organize your workspace with this adorable sleeping baby elephant cable holder. Designed with both aesthetics and functionality in mind, the elephant's trunk acts as a sturdy hook to keep your USB, charging, or headphone cables perfectly in place. Its charming, minimalist design makes it a perfect gadget for any desk, nightstand, or office setup. This model is optimized for both FDM and Resin 3D printing. For the best look, we recommend using a matte slate grey filament or resin to achieve a modern, stone-like finish. Print Settings Recommendations: - Layer Height: 0.1mm - 0.2mm for smooth curves. - Infill: 15-20% (Grid or Gyroid). - Supports: Minimal supports may be needed under the trunk depending on your printer's bridging capabilities. - Material: PLA, PETG, or Tough Resin. Never lose your cables behind the desk again—let this little elephant hold them for you!

Sleeping Elephant Cable Holder & Desk Hook

Add a touch of charm and functionality to your workspace with this adorable Sleeping Baby Elephant Phone Holder. Designed with both aesthetics and utility in mind, this 3D model features a cute elephant in a peaceful slumber, with its trunk elegantly curved upward to securely cradle your smartphone in both portrait and landscape modes. The sturdy flat base ensures maximum stability on office desks, bedside tables, or kitchen counters. Optimized for both FDM and Resin 3D printing, this model prints beautifully without complex supports. For a premium look, we recommend a matte slate grey filament or resin to achieve a sophisticated stone-like finish. Print Settings Recommendations: - Layer Height: 0.15mm - 0.2mm for FDM / 0.05mm for Resin. - Infill: 15-20% (Gyroid recommended for weight). - Material: PLA, PETG, or Tough Resin. - Supports: Minimal needed under the trunk. Perfect as a gift for elephant lovers or as a unique desk accessory!

資源庫

關於這些資源