This single column steam hammer was built in 1907,  for  the opening of the Clyde Port Authority (Clyde Navigation Trust) repair workshops in Renfrew.

When the works closed the hammer was transferred, with other machinery, to the Scottish Maritime Museum.

It is an example of a steam hammer made to Rigby’s patent by the leading maker of such machines, RG Ross & Sons at their Greenhead Engine Works in Glasgow. It was used to forge replacement parts for the Clyde Navigation Trusts’s fleet of dredgers and hopper barges.

Steam hammes consists of a cast iron base plate and the hammer body which carries a steam piston and hammer head.

It was operated by pulling on the long metal lever on the right hand side. This released steam into the piston making the hammer head move down with great force.
A trained operator could vary the pressure the hammer head exerted - some chose to show off their skills by borrowing a watch, placing it under the hammer and halting the hammer head a fraction above the glass face.

RG Ross & Sons Steam Hammer

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-22511.1](https://www.online.landessammlungen-noe.at/objects/1014670)

**Material:** Silver

**Dimensions:** 7,71 x 4,47 cm, 17 mm

**Dating:** 475 - 525 CE

The silver brooch is distinguished by its semi-circular, hollow headplate. The headplate is embellished with five buttons of alternating shapes, which have been inserted, soldered and secured by iron pins. Three of these buttons are still intact. The longitudinally profiled bow is fitted with a diamond-shaped base plate featuring an animal head at one end. The inner surfaces of the head and base plates are decorated with five spiral tendrils in a fluted pattern, whilst the eyes and nostrils of the animal head are gilded. The frame of the foot and the central bar of the clasp are nielloed. 

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Bow Fibula

**Collection:** Roman Archeology Dept.
 
**Inv.-No.:** [CAR-M-2802](https://www.online.landessammlungen-noe.at/objects/1306555)

**Material:** Bronze, enamel

**Dimensions:** 3,5 x 0,6 cm

**Dating:** 2nd - early 3rd century AD

Brooch in the shape of a shoe-sole with a hinge mechanism and a border loop at the heel. The base plate is completely enamelled in green, and the nail decoration is suggested by 25 preserved (and two missing) dark blue enamel dots. The pin is only partially preserved.

This object was digitized through the 'Kulturerbe digital' program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Shoe-sole brooch

This model represents a hinge mounting bracket designed for mechanical assemblies. The component features a rectangular base plate with mounting holes and a cylindrical pivot support used for connecting rotating or hinged parts.

The curved reinforcement between the base and the pivot housing improves structural strength while maintaining a compact design. The part demonstrates common CAD modeling techniques such as extrusion, filleting, hole features, and cylindrical geometry creation.

This model was created as part of a mechanical CAD practice series to improve skills in parametric modeling and mechanical component design.

Hinge Mounting Bracket with Cylindrical Pivot

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-6981.1](https://www.online.landessammlungen-noe.at/objects/254562)

**Material:** Gold plated silver

**Dimensions:** 5,74 x 2,66 cm, 10,5 mm

**Dating:** 6th Century

This silver brooch has a gold-plated surface. The brooch stands out due to its rich decoration, expressed through the dense arrangement of seven small buttons around the edge of the semicircular head plate and its intricate design. There is an animal head at the base of the brooch. The head plate, sides of the bow and base plate are all elaborately carved. Niello-decorated strips outline the contours.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

The arms and weapons are from Sheranes rig of V1:
https://boosty.to/sherane/posts/ded53269-86b0-4ef2-a0b2-6f37b5c24cf5?share=post_link
And the base plate is from another V1 stl file i took:
https://www.thingiverse.com/thing:6911886

I might update this if new weapons get added although im not sure how it will fit but ill cross that bridge when i get to it
and i will  later add the V1 in pieces so its easier to paint and assemble

V1 Statue with weapons

**Collection:** Roman Archeology Dept.
 
**Inv.-No.:** [CAR-M-2800](https://www.online.landessammlungen-noe.at/objects/1306553)

**Material:** Bronze, enamel

**Dimensions:** 3,8 x 1 cm

**Dating:** 2nd - early 3rd century AD

A brooch in the shape of a shoe-sole with a hinge construction and a small loop at the heel. The base plate with a narrow frame is entirely enameled in orange-red, and the nail decoration is indicated by about 14 points without enamel inlays. The narrow edge of the sole is adorned with a continuous row of fine, successive dots. The pin and pin holder survive only in fragments.

This object was digitized through the 'Kulturerbe digital' program of the Federal Ministry for Arts, Culture, Public Service and Sport.

This 3D model represents a clevis mounting bracket with a cylindrical housing, designed as part of a mechanical CAD practice series. The component includes a hollow cylindrical body supported by a base plate with mounting holes and a dual-ear clevis feature for pin or pivot connections.

The design demonstrates common mechanical CAD techniques including extrusion, hole features, cylindrical geometry creation, and feature-based modeling. Such components are commonly used in mechanical linkages, hinge mechanisms, and structural mounting assemblies.

This model was created to practice parametric solid modeling and mechanical component design.

Clevis Mounting Bracket with Cylindrical Housing

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-22958.95](https://www.online.landessammlungen-noe.at/objects/1117166)

**Material:** Gold pleated silver

**Dimensions:** 61 x 21 mm

**Dating:** 1200 - 1350 CE

The hook fastener is composed of a silver base plate in hexafoil shape, topped with a gold-plated background plate and a rising, five-fold profiled hexafoil frame. The male figurine is semi-plastic and is set within a frame of foliage. The object is has a cylindrical decorative element affixed to a hook. This element exhibits a quatrefoil design and a plastic decoration that is partially broken and illegible. The decoration is situated on the front of a golden base plate, which features diagonal hatched spandrel areas. The front of the object is gold-plated, and three strip-shaped rivets are present on the back of the decorative plate. 

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

Hook fastener

This model represents a pivot support clamp bracket designed as part of a mechanical CAD practice project. The component includes a base plate with mounting holes, a vertical cylindrical support, and a semi-circular clamp arm intended for holding cylindrical components such as pipes or rods.

The design demonstrates key CAD modeling techniques including extrusion, cut features, cylindrical geometry creation, and structural support design. The model was created to practice parametric solid modeling and mechanical part design.

A suitable component for applications involving mechanical supports, pipe holders, or adjustable mounting brackets.

Created using CAD modeling tools as part of continuous learning in mechanical design.

Pivot Support Clamp Bracket

This model represents a rib-reinforced mounting base with a central cylindrical boss, designed as part of a mechanical CAD practice project. The component consists of a square base plate with four mounting holes and a central vertical boss used for supporting a shaft, pin, or mechanical connection.

Triangular reinforcing ribs are added between the base plate and the central boss to improve structural strength and load distribution. This design demonstrates common mechanical CAD techniques such as extrusion, rib creation, hole features, and feature-based parametric modeling.

Such components are commonly used in machine bases, support brackets, and structural mounting elements in mechanical assemblies.

Rib Reinforced Mounting Base with Central Boss

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-22511.2](https://www.online.landessammlungen-noe.at/objects/1015051)

**Material:** Silver

**Dimensions:** 7,16 x 4,34 cm, 16,2 mm

**Dating:** 475 - 525 CE

The silver brooch is distinguished by its semi-circular, hollow headplate. The headplate is embellished with five buttons of alternating shapes, which have been inserted, soldered and secured by iron pins. Two of these buttons are still intact. The longitudinally profiled bow is fitted with a diamond-shaped base plate featuring an animal head at one end. The inner surfaces of the head and base plates are decorated with five spiral tendrils in a fluted pattern, whilst the eyes and nostrils of the animal head are gilded. The frame of the foot and the central bar of the clasp are nielloed. 

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-6981.2](https://www.online.landessammlungen-noe.at/objects/254563)

**Material:** Gold plated silver

**Dimensions:** 5,75 x 2,7 cm, 10,7 mm

**Dating:** 6th Century

This silver brooch has a gold-plated surface. The brooch stands out due to its rich decoration, expressed through the dense arrangement of seven small buttons around the edge of the semicircular head plate and its intricate design. There is an animal head at the base of the brooch. The head plate, sides of the bow and base plate are all elaborately carved. Niello-decorated strips outline the contours.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

The galaxy’s most loyal rolling companion has arrived! Bring home the hero of the Resistance with this BB-8 3D printable statue. This model perfectly captures the unique spherical design and chirpy personality of the astromech droid. Featuring his intricate circular panels, primary lens, and antenna array, this model is a masterclass in clean, mechanical sculpting.  To ensure your droid stays exactly where you need him, this model includes a premium integrated display base plate. The base provides a stable, recessed foundation that cradles BB-8’s spherical body, preventing any rolling while elevating the piece to a professional collector's standard. It’s a "homey" piece of the Star Wars universe that looks incredible on a tech desk, a gaming shelf, or as a gift for a fellow fan.

bb 8 with base plate

Finish the fight in style with this Chibi Master Chief 3D printable figure! This model captures the iconic MJOLNIR armor and golden visor of Halo’s legendary protagonist, reimagined with a charming, oversized helmet and compact "chibi" proportions. The integrated base plate ensures Chief stays upright on any surface, making it an ideal desk companion or a high-impact collectible for your gaming shelf. It’s the perfect blend of "cute" and "combat-ready."

Chibi Master Chief with base plate

For proper use, we recommend downloading the original file.The Converted version is intended for web viewing only. In the original file, the following are fully preserved:✔ full scene structure✔ complete materials without reduction✔ proper texture maps✔ correct object namesIf you are going to integrate the model into a project, download the source file.Thishigh quality 3D scanof a rusted industrialmetal baseplatefeatures a worn weathered look with bolts and raised elements making it ideal for detailed industrial or construction themed scenes. Therusty texturesandstructural imperfectionscapture the essence of abandoned or aged machinery parts adding realism to your designs. Perfect for use as a prop in environments such as factories scrapyards or post apocalyptic settings this model brings a rugged authentic feel to any visual project.

Rusted Metal Base Plate

**Collection:** Prehistory and Historical Archeology Dept.

**Inv.-No.:** [UF-22958.93](https://www.online.landessammlungen-noe.at/objects/1117163)

**Material:** Gold pleated silver

**Dimensions:** 43 x 55 mm

**Dating:** 1200 - 1350 CE

The brooch has a teardrop-shaped frame and a silver base plate decorated with a pierced, gold-plated attachment. Four backward-looking eagles are arranged on the base plate, alternating with three mountings. Accompanying the eagles is an eyelet attached to the outer edge of the frame, a hole at the pointed end of the frame and an impression of another mounting. The eagles are mounted on round wire loops and positioned at an angle inwards. The sockets for precious stones have a high divergently sloping rear frame and a low, grooved front frame, which is riveted to the base plate.

This object was digitized through the ‘Kulturerbe digital’ program of the Federal Ministry for Arts, Culture, Public Service and Sport.

資源庫

關於這些資源