Planes of the Head - Andrew Loomis Method

The 4 steps of Andrew Loomis method for Drawing Heads, each with its respectives planes. 
Sculpted in Zbrush and Lookdev in Blender. Lines were made with Grease Pencil tool.

Josh Galeto

Planes of the Head - Andrew Loomis Method

**UFO Flying Saucer** made in Blender with a very high resolution, good for scenes, games and CGI

An unidentified flying object (UFO) is any perceived aerial phenomenon that cannot be immediately identified or explained. On investigation, most UFOs are identified as known objects or atmospheric phenomena, while a small number remain unexplained.

I do not charge for this work, but if you like my content and want to help me in my first steps of 3D graphic design you can make a donation to my PayPal account [https://www.paypal.me/RafaelGarcia1975](http://) , help is always more than welcome. Thank you all very much in advance and I hope my models will be useful in your projects. Blessings to you

UFO Flying Saucer Spaceship OVNI

CC0

As sketchfab does not allow you to untick the Attribution box when uploading this model is sorted as CC-BY.

Free to use in any capacity.

Will continue updates for more parts and variation and quality.

Make a basic hull, turret or vehicle body shape. Smash a load of parts on top and there you have it, military vehicle. Some parts would also work well for machinery or construction plant.

you may need to decimate the wheels if your duplicating them a lot as it can chug out blender if you have a old PC.

1.1 Updates
* added military style parts from breakers yard kits
* added smoke grenade discharger, sand board, tool/stowage bins
* tweaked camo texture

1.2 Updates
* added bar armour, 2 snorkels, wire steps, offroad winch and mounted weapon ring
* organised objects into collections

feel free to support me at:

https://www.buymeacoffee.com/Britdawgmstrfnk
or
https://ko-fi.com/britdawgmasterfunk

If you have any request for things that you would like me to add in just post in the comments.

Military Landvehicle Kit 1.2 (CC0)

Marble portrait bust: Pericles wearing a helmet pushed back on his head. A Roman copy of an earlier Greek original. The name is inscribed in Greek. 2nd Century AD from Tivoli, Italy.

Height: 58.42 centimetres 

Compiled by Daniel Pett using OnePlus 3 phone camera and 210 photos. This bust is on a high pedastal and is hard to reach without steps if you plan to 3d model it.

COL: https://www.britishmuseum.org/collection/object/G_1805-0703-91

Bust of Perikles

The stairs located at the south west corner of London Bridge on Montague Close.

https://www.londonremembers.com/memorials/nancy-s-steps-plaque-2
https://londonist.com/london/history/where-are-nancy-s-steps-and-why-do-they-lie-to-us

From the blue plaque: "These steps and arch are surviving fragments of the 1831 London Bridge designed by John Rennie and built by his son Sir John Rennie. These steps were the scene of the murder of Nancy in Charles Dicken's novel Oliver Twist."
It is not clear who placed this plaque and the part about Oliver Twist is not accurate. See links above.

867 photos taken in February 2022 with a Sony a7R III and processed in Reality Capture.

London Bridge Nancy Steps

This is just an experiment with exporting a particle animation to Alembic format (.abc) from Blender.  I created the effect using similar steps as those shown in this tutorial (except I used a cube as the particle so it's lower poly, and I added randomness to the velocity, which I don't like in retrospect): https://youtu.be/k5WH5WY1Osc?si=Y1sfy87AwmzhI96m only up to the point where you start adding a material and adjusting render settings, since that is not necessary for export.

Initially I just selected the emitter and particle and exported them as Alembic with default export settings, and overall it worked remarkably well.  Sketchfab had no issue importing the animation.  Unfortunately though, without any adjustments, the animation's two stages (rising up into the air, then bursting) came out overlapped.  So I went looking for a way to fix that, and found a great Blender addon for baking particle effects by searching Gumroad for scaryplasmon CakeParticles.

In future tests I will remap the texture.

Fireworks Demo - Free Download

A sculpture of Ganesh at the summit of [Tiger Cave Temple](https://en.wikipedia.org/wiki/Tiger_Cave_Temple) (Wat Tham Suea) in Krabi, Thailand. 116 photos taken and 1,237 steps climbed.

### Details
* Meshroom 2019.2.0
* Input: 116 images
* Camera: iPhone 7

Ganesh - Tiger Cave [Low Poly]

135 shots - Panasonic GF7

processed with agisoft photoscan

Here are nice little stairs in the Fougères Castle - France,  nice color and atmosphere - Hope you will like it.

feel free to comment.

I've got more assets and models to come "soon".

Little Medieval Steps - Fougères Castle

110 Shots - Panasonic GF7

Dinan - France

Processed with Agisoft Photoscan

Cute littles steps climbing to an old medieval door. This scene takes place under lots of trees near the Dinan's rempart. Lots of old walls and stones all around, really nice place. 

This city is quite amazing and a lot of possibilty for scanning.

I hope you will like it.

fell free to post any comments // Still wondering what display is most liked between lit and shadeless // cute vs reality.

Medieval Steps - Dinan

around 75 shots Panasonic GF7

Fougères - Britanny - France

Little steps hidden in the bush, not possible to get the exterior shot of the bannister.

hope you will enjoy it, really nice place

Feel free to post any comment in order to improve it.. I'm just a beginner!

hidden Steps

112 shots - Panasonic GF7
processed with agisoft photoscan

Here are some nice stairs in the Fougères Castle collection - France.

Awesome place to shot, neet atmosphere - Hope you will like it.

Colorfull Medieval Steps - Fougères Castle

*“The filmmakers lay claim to be the first to use their ideas of “retro-fitting” on film–the process of creating a unique object by means of a strategic assemblage of allied components; by harvesting parts from abandoned or obsolescent “donors” and re-assembling them, a new entity is created.”*

Working on Gameready Kitbash Set, first steps. Work in progress.

There is a long road of research and experimentation, mistakes and improvements ahead, our ultimate goal is to create a must-have kitbash library.

Fairfax Set Iteration 1

## Scanning
The scan took place in two steps: First the top of the lawn mower and then the bottom. For both scans I didn't use any scan spray or similar, just took the scanner and started scanning at 1mm resolution. Since then markerless laser scanning made quite some progress, especially in wired mode where scan speed was increased from 20 FPS to 60 FPS with the latest update. Hopefully this will also transfer to wireless mode in the future. 

## Post-Processing
Processing just consisted of generating the point cloud when finishing the single scans, aligning the scans to each other (I used manual feature alignment since the overlap was quite minimal) and then I meshed the scan with default settings. Only divergence from default was using the semi watertight setting since it delivers a more closed model without too much "artistic freedom" to close holes. The scan was then reduced and aligned in Quicksurface.

Lawnmower - Einstar Rockit (markerless laser)

## Scanning
The motorcycle was scanned in markerless alser mode on the Rigil using 1mm resolution and feature tracking without connection to a PC. For scanning itself I didn't do any preparations like scan spray and focused on the both sides with one scan per side whilst ensuring enough overlap for easy alignment in later steps.  
While scanning the Rigil held roughly 20 FPS. Scanning itself took roughly 5 to 10min per side, so a a bit longer than in IR mode (was using 1.5mm there though). 

## Post-Processing
Post processing was done on my workstation and included generation of the point clouds, automatic feature alignment and subsequent meshing in recommended settings. Quicksurface was used for alignment to the coordinate system and reduction of the point cloud size. Since it came out quite large I reduced it to 4M so the scan could be uploaded to Sketchfab.

BMW Motorcycle - Einscan Rigil Markerless Laser

The statue of St. Paul stands on the historic parish steps on Berggasse in Mistelbach and is one of the small Baroque monuments at the entrance to St. Martin’s Parish Church on the Kirchberg. The steps have been an important access point to the church for centuries and were renovated in 1724. As part of this Baroque redesign, two figures of apostles were erected: St. Peter and St. Paul. The ensemble of steps and figures is now a listed historic monument.

The statue of St. Paul displays the apostle’s typical attributes. In his hand, he holds a sword, symbolizing his martyrdom in Rome, as well as a book, which refers to his letters in the New Testament.

The statue was created in the 18th century by the sculptor Johann Martin Fischer. His works are characterized by lively movement, richly detailed robes, and expressive faces.

Hl. Paulus

This high-quality 3D prop features a simple, hand-crafted wooden ladder built from rough-hewn timber. Designed with a historical Midwest farm aesthetic in mind, the model showcases realistic signs of age, including dusty surfaces and worn steps from years of use.

Key Features: Style: Stylized Realism / Historical Frontier.

Details: Deep wood grain textures, weathered edges, and authentic “rough-cut” geometry. Best For: Farmsteads, barns, western environments, or medieval village scenes.

Hand-Crafted Rustic Farm Ladder_F

This high-quality 3D prop features a simple, hand-crafted wooden ladder built from rough-hewn timber. Designed with a historical Midwest farm aesthetic in mind, the model showcases realistic signs of age, including dusty surfaces and worn steps from years of use.

Key Features:
Style: Stylized Realism / Historical Frontier.

Details: Deep wood grain textures, weathered edges, and authentic "rough-cut" geometry.
Best For: Farmsteads, barns, western environments, or medieval village scenes.

Remarks:
✅ Printability: Yes
✅ Watertight: Yes
✅ Holes: 0
✅ Non-manifold edges: 0

Hand-Crafted Rustic Farm Ladder_Z

**FAZBEAR ENTERTAINMENT PRESENTS: THE UPDATED SPRINGLOCK SUIT!**

**A complete redesign from head to toe.** Enhanced mounting system keeps the suit where it belongs, while new reinforced springlocks (in various shapes for optimal grip) ensure reliable retention. No more awkward stage incidents - endoskeleton pants stay up.

**Unprecedented Mobility.** Re‑engineered arm and leg mechanics make entertaining children more comfortable. Bulky parts are now durable, lightweight plastic, cutting total weight by *15* pounds. You’ll feel the difference with your first steps across the pizzeria!

**IMPORTANT WARNING!**
By using this suit, you confirm you are a valued, irreplaceable member of our family and are familiar with all company policies including those not in your contract. Fazbear Entertainment is not responsible for injury, dismemberment, or death during suit operation or while on our premises. Any springlock trigger or other incident resulting in trauma is entirely and exclusively your fault.

SpringLocks costume

Hand-Crafted Rustic Farm Ladder_M

Anakin Skywalker, at the height of his power, a legendary Jedi Knight forged by war and prophecy. Once a hopeful slave boy from Tatooine, he has become a hero of the Clone Wars, fearless and unmatched with a lightsaber. Yet beneath his strength lies turmoil. Haunted by visions of losing Padmé Amidala, the woman he secretly loves, Anakin grows increasingly fearful of death and powerless against fate. His distrust of the Jedi Council deepens as they deny him the rank of Master, while the manipulative Palpatine feeds his doubts and promises forbidden knowledge to save Padmé. Torn between loyalty and desperation, Anakin’s fear twists into anger. In choosing control over compassion, he turns against the Jedi Order—taking his first irreversible steps toward becoming Darth Vader...

SWJA Movie Duels: Anakin Skywalker(Episode III)

This high-quality 3D prop features a simple, hand-crafted wooden ladder built from rough-hewn timber. Designed with a historical Midwest farm aesthetic in mind, the model showcases realistic signs of age, including dusty surfaces and worn steps from years of use.

Key Features:
Style: Stylized Realism / Historical Frontier.

Details: Deep wood grain textures, weathered edges, and authentic "rough-cut" geometry.
Best For: Farmsteads, barns, western environments, or medieval village scenes.

A collection of stones (some carved), columns, steps and pavement/road at the centre of the Forum, Rome.

220 photos taken in February 2026 with a Sony a7R V and processed in RealityScan.

資源庫

關於這些資源