Late 13th/Early 14th Century

Private Owner, in the care of the Oakeshott Institute

Click the model for audio!

Swords of this form were common in Europe throughout the 13th and 14th Centuries. Similar swords are depicted in I.33, the earliest European personal combat instruction that we know of today. . This was a dynamic time in the use of the sword as combatants transitioned from mail to plate armor and the use of the buckler was common.


* Overall Length : 36.06 in | 916mm
* Blade Length: 28.89 in | 734mm
* Blade Width: 2.75 in | 70mm
* Grip Length : 3.66 in | 93mm
* Guard Width : 9.21 in | 234mm
* Weight: 2.95 lbs | 1339 gr

![](https://i.imgur.com/KJ8QVVT.jpg)

Thanks to Renee Werbowski for narration.

Music - *Virtutes Instrumenti* Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/


[Support us on Patreon](https://www.patreon.com/oakeshott)


[Follow us on Facebook](https://www.facebook.com/oakeshottinstitute)

Moonbrand (Early 14th C Arming Sword)

12 solar panel setup using Galvanised Tube 48.3mm . for 330W PV is about 3960W .

soler panel setup

Here you can see it in action:
https://youtu.be/9Cofmy4bZX4

Uh...didn't find a way to attach a package with .stl files. Here they are:
https://drive.google.com/open?id=1hNs4ZOr_H-nXIlVeMiUy7iY9UJ5GkodB

Made with Fusion 360. A toy car with double-acting 1-cylinder compressed air engine (like the steam locomotives have). Has steering, which even works. I call it "vapemobile" because of the remote shape).

Apart from these printed parts, you'll need some extra ones to assemble it:

* 623ZZ bearing (4x10mm, 3mm hole) (may poorly work without it)
* Piece of 1.75mm filament
* Rubber band
* Thin plastic bag
* 6mm silicon pipe (can be found in any aquarium shop)
* 4mm pipe from intravenous dropper (or any that you could pull onto the syringe end)
* Two 2ml syringes
* 8mm piece of 4mm PTFE tube (optional)
* Air balloon
* Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25, M3x50
* M3 washers x10
* M3 nuts x30

3d Printable Pneumatic-Engined Toy Car

This little ladybug (3mm) has been scanned with DISC3D: https://zookeys.pensoft.net/article/24584/

Tytthaspis sedecimpunctata

This is a 3D scan of the holotype fossil specimen of *Calymene blumenbachii*, the "Dudley Bug", one of the best known species of trilobite. This specimen comes from Dudley from the Much Wenlock Limestone Formation, and lived around 428 million years ago, when the Midlands was covered by warm, shallow, tropical seas. Digitised using an Artec Spider 3D scanner by University of Birmingham Palaeobiology & Palaeoenvironments undergraduate student Luke Meade.

Dimensions of the specimen:

Length: 101mm

Width: 73mm

Height: 38mm

The "Dudley Bug" trilobite

Made with 3ds Max and Substance Pianter. 

**From wikipedia:**
The StG 45(M) (abbreviation of Sturmgewehr 45, "assault rifle 45") sometimes referred to as the MP 45(M), was a prototype assault rifle developed by Mauser for the Wehrmacht at the end of World War II, using an innovative roller-delayed blowback operating system. It fired the 7.92×33mm Kurz (or "Pistolenpatrone 7.9mm") intermediate cartridge at a cyclic rate of around 450 rounds per minute.

This one is based off the weapon seen in this video: https://youtu.be/NrKhJC35QRA

StG 45(M) / Gerät 06H / MP 45(M)

![](https://i.imgur.com/jSTrKfy.jpg)

Located on the shore of [Plounéour-Trez](https://goo.gl/maps/j3MMCNg8Lzo), this cross from the XIXth century faces the Bay of Goulven - an ideal location for water sports or on-foot shell fishing depending on the tide - and is a reminder of the past strong religious culture of Brittany (a region of France).

In Breton, "Beg" means headland, and "Groaz" translates to cross.

* 542 pictures (Pocophone F1).
* Colmap, OpenMVS, Blender and BakeMyScan.
* [Background sound](https://freesound.org/people/suukadi/sounds/410323/) from Mjeno on [FreeSound.org](https://freesound.org)

"Beg Ar Groaz"

Female spotted lanternfly specimen. 26.3mm max length,  Ground resolution 16.6μm/pix, RMS reproduction error 0.61025 pix. Specimen collected by Dr. John Cooley, 9/16/2025, CT Hartford County, UConn Campus Hartford.

Spotted Lanternfly Female

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (with latest update laser mode now reaches 120FPS over WiFi, not bad at all).  
For IR mode I chose large mode at 0.5mm resolution and marker tracking as well as small mode at 0.2mm resolution with marker tracking. Normally I don't use small mode much since I mainly use markerless laser scanning for parts where I would use it normally. My sweet spot for IR mode is somewhere between 0.5mm and 3mm.

## Post-Processing
For all three scans precessing was done using the recommended settings within ExScan Rigil. This includes point cloud generation and meshing.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other. The laser scans had to be reduced to allow upload to Sketchfab (just under 4M triangles will result in a 100MB ply when exporting from Quicksurface).

Scan Bench - Einscan Rigil IR Large

## Scanning
Scan was done in IR mode with 3mm resolution and large mode, Rigil was used standalone. For tracking only feature tracking was used (texture would have helped but the light was dim and flickery (fluorescent tubes be thanked) so no real help...). This created a bit of a challenge when scanning the tar large flat parts of the couch. The persian carpet would have provided enough texture but it couldn't be used for tracking due flickering of the light tubes. Scan itself took roughly 5min.

## Post-Processing
Just point cloud generation and meshing at recommended settings (meshing as semi-watertight) on my workstation (simply faster than on device). After meshing I did a quick texture optimization and alignment within Exscan Rigil.

Seating Area (Upholstery) - Einscan Rigil

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (with latest update laser mode now reaches 120FPS over WiFi, not bad at all).  
For IR mode I chose large mode at 0.5mm resolution and marker tracking as well as small mode at 0.2mm resolution with marker tracking. Normally I don't use small mode much since I mainly use markerless laser scanning for parts where I would use it normally. My sweet spot for IR mode is somewhere between 0.5mm and 3mm.

## Post-Processing
For all three scans precessing was done using the recommended settings within ExScan Rigil. This includes point cloud generation and meshing.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other.

Scan Bench - Einscan Rigil IR Small

# 明器／甑（Mingqi / Steamer）

最大径（Maximum diameter）：10.3mm

老鉄山（中国遼寧省旅順）採集／後漢代／明治時代に発見／大阪歴史博物館所蔵
From Lao Tieshan (Lüshun, Liaoning Province), China. Discovered in the Meiji era（1868-1912）.
Later Han Dynasty / Osaka Museum of Histry

modeling : Scanner

This 3D model data is available for download. Please read [the guidelines](https://www.osakamushis.jp/eng/visit/3D_culturalproperties_eng.html) carefully before use.

明器／甑（Mingqi / Steamer）

ДИКАРТ (DIKART) завод гипсовой лепнины:

- Москва, ул. Марксистская 3 стр. 3

- Санкт-Петербург, ул. Введенская 21, пом. 2

Тел.: +7(495)150-21-95, +7(812)317-11-95, +7(800)707-52-95

info@dikart.ru

https://dikart.ru

EXPORT department

export@dikart.ru

Др-144 D1106x43mm

For production-ready use, we recommend downloading the source format.The Converted version is intended for web viewing only. In the source file, the following are fully preserved:✔ native scene structure✔ unsimplified materials✔ accurate texture maps✔ original object namesIf you are going to integrate the model into a project, select the Original format.Ikea BAGGANAS 143mm furniture Handle GOLD

Bagganas 143mm Handle

SynchroSit 10 L2-107D Chair - TV /Km00/Nb00/D04P/H13mM-2D(M24.B11.G19.W03) (Black)

 License: CC BY 4.0

 This model is an exact digital replica of the real chair manufactured by Metta. All geometric dimensions correspond to the physical sample. The materials are rendered in realistic PBR quality. The model is in its final, verified state. 

 our website is https://ergolife.pro/?utm_source=forum_3do&utm_campaign=sketchfab

Office chair Ergolife

For full functionality, we recommend downloading the Original format.The Converted version is intended for web viewing only. In the original file, the following are fully preserved:✔ original scene hierarchy✔ complete materials without reduction✔ correct PBR texture maps✔ proper object namingIf you plan to use this model in production, select the Original format.Ikea KALLROR 213mm Handle SILVER

Kallror 213mm Handle

For full functionality, we recommend downloading the Original format.The converted file is intended for web viewing only. In the original file, the following are fully preserved:✔ full scene structure✔ complete materials without reduction✔ correct PBR texture maps✔ proper object namingIf you intend to use the asset in a production environment, choose the original version.Metal Abstract Wall Decoration 2334mm 1123mm 78mm

Decor

Late Bronze Age poppy headed fine ware cup found at Must Farm, Peterborough.

Weight: 64g
Rim Diameter: 5.3cm
Base Diameter: 1.8cm
Height: 6cm
Thickness: 3mm
Fabric: Sand
Context: 376

Accession Number: PETMG:2026.04.MUS06/15.P41

© Images produced by Peterborough Museum and Art Gallery. Licensed under Creative Commons Attribution 4.0 International ([CC BY 4.0](https://creativecommons.org/licenses/by/4.0/))

P41 PGK Must Farm Poppy Headed Fineware Cup

Ring print ready


Print-ready GLB with antique gold coloring, 2mm base and 3mm raised detail.
Ideal for jewelry, props, or decorative prints.

Credit: Ravi858 — https://sketchfab.com/Ravi858

Ring print ready

One Hand Book Holders v2.1 => The thickness has been increased from 5mm to 10mm. v3.1 => The thickness has been increased from 3mm to 10mm. v4.1 => The thickness has been increased from 3mm to 10mm. If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated! Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan

One Hand Book Holders v2 to v4

The Forgemaster's gift to the community. Free. The Forgemaster Dagger is a full-scale 3D printable cosplay prop, support-free, multicolor-ready, with built-in LED channels so it glows from within. This is a free model from our upcoming Kickstarter campaign The Eternal Forge: Fantasy vs Grimdark Collection — launching April 7th. If you like what you see, follow our campaign and don't miss the Early Bird rewards. 👉 https://www.kickstarter.com/projects/meniatures/the-eternal-forge-fantasy-vs-grimdark-collection Printed it and loving it? Show us! Share your make on social media and tag us, every post helps spread the word and brings more people to our Kickstarter campaign. Let's build this community together! 💪 📸 Instagram / TikTok: @MEniatures https://www.instagram.com/me_niatures/  ⚠️ Important: This model is free for personal use only. If you'd like to sell prints, you'll need to grab a commercial license, available through our Kickstarter campaign. 💡 LED Parts List Here are the exact components we used to light up the dagger: LED strip: 3mm COB LED strip with built-in 5V battery pack  Switch: 10x15mm rocker switch (ON/OFF) Both are very affordable and easy to find. We also recommend using transparent filament for the core so the light shines through beautifully!    FEATURES: -Support-free-Multicolor-ready-LED integration-Easy assembly-Blade available in two sizes — full-size for large bed printers and a scaled version for smaller beds-Blade available in two versions — single piece, or split in two parts for easy multicolor printing-Hollow blade interior — ready for LED lighting-Handle available in two versions — solid, or with a pre-cut hole for an on/off switch for the LED lights  

[FREE] Forgemaster Dagger --LED Ready Cosplay Prop | Fantasy vs Grimdark Kickstarter Campaign

Summary This is a customizable snap-fit pill box, perfect for organizing daily medication. I designed it to be printable in Glow-in-the-Dark PLA so it's easy to find in the dark! This project includes 4 main versions of the lid, each featuring a different number of notches. This allows you to choose your preferred opening/closing "click" force. To ensure a perfect fit on any 3D printer, each version is provided in 3 different tolerance files (0.1mm, 0.2mm, and 0.3mm). In total, you are downloading 12 STL files to find the perfect one for your setup. Version Details (Notches) Choose the fit you prefer: V1 (16 Notches): Provides a very secure, tight fit. (Hard to open, good for travel). V2 (8 Notches): A standard, secure "click" fit. (Recommended). V3 (4 Notches): A lighter fit. Easy to open and close. V4 (No Notches): A simple, smooth friction-fit version with no clicking mechanism. Tolerance Details (How to Choose) This refers to the gap between the lid and the box. 0.1mm Tolerance: For highly calibrated printers. This provides a very precise, tight fit. (Confirmed working on my printer with PLA). 0.2mm Tolerance: The standard tolerance. If you are unsure, I recommend you print this file first as a test. 0.3mm Tolerance: For printers that tend to over-extrude or if you want a guaranteed looser fit. Example: The file V2_8-Notch_0.2mm.stl is Version 2 (8 notches) with the standard 0.2mm tolerance. Print Settings These are the settings I used for a successful print. Filament: PLA (Prints beautifully with Glow-in-the-Dark PLA!) Resolution: 0.2mm Infill: 15% Walls: 3 Rafts: No Supports: No (Designed to print without supports) Please post your makes! I would love to see which version and tolerance worked best for you, especially with different filaments. Happy printing! If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated! Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan

Customizable Pill Box

40% discount on STLs for all Patrons and Tribers! https://www.myminifactory.com/users/bulletbasilica?show=tribehttps://patreon.com/BulletBasilica Try before you buy: download free models, bases and bits HERE More models from this project HERE PARAMETERS Number of STLs: 4x3 (chitubox, unsupported and pre-supported files). Height: 33mm to the eyes level. Approximate resin volume: 3g (Elegoo Standard Resin). Scale: 28mm Test-printed for resin printing. CONTACTS AND LICENSE All rights reserved. Commercial use is provided ONLY if there is a commercial license. See our Tribe for details: Patreon Tribes Join our Discord community and be sure to follow us on Instagram @dakkadakka.store not to miss any updates!

Steel Union Soldier

Pistola da 10 mm da fallout4/76 pistola modulare da Fallout 4 , fedele al 90%. Per completare l'assemblaggio occerrà una molla da biro per il movimento del grilletto, due perni da 6mmX35mm per bloccare il castello 1,3 e 4 insieme , 4 perni da 3mmX15mm per bloccare il castello 1, 5 e 6 insieme. Facoltativa una vite senza fine da 4 mm  da 10cm per aggiungere un ulteriore supporto ai vari incastri . Assente la texture sul calcio , non sono stato in grado di aggiungerla.

资源库

关于这些资源