You are Free to use it freely for non-commercial purposes like personal, educational, or artistic projects. Rest assured, It comes with a variety of facial expressions and rig in the eyes. Just remember, don't use it for commercial purposes or distribution, make sure to reach out for proper permissions or licensing.
I'm not affiliated or connected in any way to 'Company''. Enjoy creating with this model.

Details:
18,078 Vertices
17,225 Faces
75 Bones
6 Eye ShapeKeys
10 Facial ShapeKeys
Native Blender File (.blend)

Recommend: Dont mixing facial shape keys, as it can potentially cause issues with the 3D model.
Shape Key Drivers of "Scared" and "Eyes" added for test. (play with the sliders in Pose Mode)

Pomni from The Amazing Digital Circus

**Dji FPV by SDC**

Discover the new DJI FPV drone improved by SDC, with a body made of Carbon Fiber and more powerful camera and battery, the FPV and connected to a VR headset which facilitates the elbow.

Camera 5K - Maximum speed: 150km / h - Battery 1: 30 - Weight: 300g

Blender 2.93LT - Free download - By SDC


⭐️⭐️⭐️Don't forget to like for the next version with animation !!👍👍👍

For more models click here (everything is free !!) :

https://sketchfab.com/3Duae

Dji FPV by SDC -  High performance drone

**Welcome to [The Hallwyl Museum](https://hallwylskamuseet.se/en/) in Stockholm, Sweden.**
Once the home of [Walther](https://hallwylskamuseet.se/en/) and [Wilhelmina von Hallwyl](https://goo.gl/Y8iiJs).

In The Serving Room the [footmen](https://goo.gl/9r5oY3) polished silver and put the last touches to the dishes before they were served.
The Serving Room is connected to the basement floor kitchen via the back stairs, a lift and a dumbwaiter. There were separate stairs and passages for the servants so that the work could run smoothly and at the same time not be visible in the grand rooms.
The threshold between this room and the dining room marked an invisible border between the family’s domain and the servants' areas; a border that should not be crossed casually. The servants’ work spaces should be respected. This also applied to the owner of the house.

![](https://i.imgur.com/N7N03Is.jpg)

The images for this project were captured using an [array](https://goo.gl/ePHjDr) of four Panasonic Lumix GX8 cameras.

The Serving Room

DOWNLOAD THE FBX VERSION

Long time no posts

The model has been cleaned and rigged and it should hopefully work, the model contains 3 textures which are the normal and blink and hurt, if you want to get them download the fbx version

I only tested this model on blender, so for anyone who used the model on prisma3D please tell me if it works

Cleaning this model was painful because the model faces were not connected to each other which made cleaning the model really hard but not impossible

Should I make a tutorial on how to use the model?

Bassie (Dandy's World)

# [Get rigged and optimised model for commercial use.](https://www.fab.com/listings/11781f69-27bc-4b83-bfd7-a8ddd252b3b7)

[Please watch and like this work on IG, thanks! ](https://www.instagram.com/reel/DDzKNxqMplk/?utm_source=ig_web_button_share_sheet&igsh=MzRlODBiNWFlZA==)

The name **Lilith** stems from lilû, lilîtu, and (w)ardat lilî). The Akkadian word lilû is related to the Hebrew word lilit appearing in Isaiah 34:14, which is thought to be a night bird by some modern scholars. In Mesopotamian religion, found in the cuneiform texts of Sumer, Assyria, and Babylonia, lilîtu is a spirit or demon. Many have also connected her to the Mesopotamian demon Lamashtu, who shares similar traits and a similar position in mythology to Lilith.

𝕷𝖎𝖑𝖎𝖙𝖍

This was originally the work for my intro to 3D modeling and lighting courses this past semester, but with how things have been going with Covid-19 I wanted to express myself with this scene. Many artist are staying safe and working from home, myself included, but this can lead to feeling disconnected. I wanted to push this disconnect further in the scene by visually breaking away the room that is surrounded by the void. 

This scene is showing where artists sometimes end up, but the message is that we don't have to be "stuck" in this vast loneliness that we are all experiencing. There is always a brighter side, whether it be the family you have with you, or some funny cat videos on youtube. I hope everyone is staying healthy and safe, keep looking to the bright side.

Isolation

The abandoned hospital - the large location ripped from **The Evil Within** game

Here is the third final part of the full map,grounds and rooms, with some objects embedded,the doors are included as a separate objects.  All three parts can be seamlessly connected to each other, make sure the exit doorway of one block match the entrance of another

The scene has been composed in Unreal Engine from original game assets and exported to fbx. You can download original FBX with uncompressed tga textures from my website (check my profile)
![](https://veterock.com/images/Hospital_part3.jpg)

Abandoned Hospital: part three

**Fish-shaped besamin box**

Besamin boxes [Heb. bassamim, psumin-byksy] served as containers for spices and were used during the end of the Sabbath and were usually tower-shaped. Interestingly, the besamin box from Nowy Sącz is fish-shaped, whose head, connected to a trunk by a hinge, can be opened and tilted to the side. The fish trunk consists of five overlapping segments, each tapering towards the tail fin, each ending with semi-circular scales, each textured and covered in a network of furrows. The individual segments of the trunk are mutually conjoined in such a way that the body of the fish can be slightly bent.

**For more images and further information, visit:** 
https://muzea.malopolska.pl/en/objects-list/696

Inventory number: MNS/3733/S 

Location of the physical object: Nowy Sącz District Museum, Poland

**Digitalisation: Regional Digitalisation Lab, Małopolska Institute of Culture in Kraków, Poland; “Virtual Museums of Małopolska” Project**

Fish-shaped besamin box

📸 Scan by ModBod (http://codame.com/projects/modbod3d) in Harajuku in 2016. 

💪 Support ART+TECH by inviting us to your next event. No crowd is too big or small for capture fun!

🎨 View and experiment with models on Windows, OS X or Linux using free software like http://www.meshmixer.com/ 

💜 Please respect the Creative Commons By Attribution license when you download the model to make derivative artworks. Tag @CODAME and #ModBod when you share your creations  

🤓 Capture Tech: iPad running itseez3d.com software connected to a  http://structure.io depth sensor.

🙏 Thanks to Shoichi Aoki of @fruitsmag @streetmag @tune_mag for the Harajuku tour and arranging models. Thanks to @minikomi for translating.

🖼 Background by http://ciracrowell.com/

asachill

Eilean Donan (Scottish Gaelic: Eilean Donnain) is a small tidal island situated at the confluence of three sea lochs (Loch Duich, Loch Long and Loch Alsh) in the western Highlands of Scotland, about 1 kilometre (5⁄8 mi) from the village of Dornie. It is connected to the mainland by a footbridge that was installed early in the 20th century and is dominated by a picturesque castle that frequently appears in photographs, film and television. The island's original castle was built in the thirteenth century; it became a stronghold of the Clan Mackenzie and their allies, the Clan MacRae. However, in response to the Mackenzies' involvement in the Jacobite rebellions early in the 18th century, government ships destroyed the castle in 1719. The present-day castle is Lieutenant-Colonel John Macrae-Gilstrap's 20th-century reconstruction of the old castle. [wiki]

Experimental vr, reconstructed solely from found drone footage, 2x8K  textures.

Eilean Donan Castle

poppy tongue

The Old Town Hall in Brno is a former town hall building and the oldest secular building in the city. It is located in the cadastral area of Brno, between the Green Market and Svobody Square on Radnická Street. The beginnings of the construction date back to the 13th century. As a town hall the building served until 1935, then the councilors relocated to a nearby newly renovated State House, which is why it began to be called New Town Hall. At present there is a cultural and information center on the premises of the Old Town Hall and a Brno bicycle and dragon are connected to the tower, to which several Brno legends are connected.

Link to Google Street View:  [https://goo.gl/maps/ebSYrku3RJU2](http://)

![](https://upload.wikimedia.org/wikipedia/commons/thumb/2/27/Brno_City_Center_163.JPG/170px-Brno_City_Center_163.JPG)

Brno old town hall portal

St. Martin's Chapel is a former late Gothic charnel house to the south of Perchtoldsdorf church. The chapel, named in 1455, was rebuilt in 1512 by Master Georg from Vienna and is connected to the castle by a walkway. Until the 16th century, the remains of local residents buried in the small burial ground next to the church were kept here. The memorial to the victims of the two world wars has been housed here since 1953.

Martinskapelle

A medieval three-story brick arch bridge spans an abyss between two heptagonal, slightly twisted stone towers with battlements. The 3D model consists of several 10,000 individually shaped and textured bricks.

Medieval Heptagonal Towers Connected

The battery consists of 9 Leiden jars. They are all closed with wooden lids, in which brass rods ended with knobs are mounted. Each of them is connected to the other ones by means of brass rods. The Leiden jar is the oldest form of a capacitor, a device used to store electrical charges. The jars connected in a battery allowed for increasing the amount of the charge stored. This device was independently invented in 1745 by Pieter van Musschenbroek (1692–1761), a professor at Leiden University (hence the name of the device), and Ewald Jürgen von Kleist (1700–1748), a lawyer and scholar working in Kamień Pomorski.
The jar could be electrically charged by contacting the rod with an energised body.

Time and place of creation: 19th century, England

Inventory number: 17072; 2187/V

Museum: Jagiellonian University Museum Collegium Maius

https://muzea.malopolska.pl/en/objects-list/2765

Digitalisation: Digitalisation: RDW MIC, Virtual Małopolska project

Batteries of Leiden jars

The female reproductive system of the rabbit (Oryctolagus cuniculus) is specially adapted for internal fertilization, gestation, and live birth. It consists of paired and unpaired organs arranged within the abdominal and pelvic regions.

The system includes a pair of ovaries, which are small, oval-shaped structures responsible for producing ova (eggs) and female hormones. Each ovary is connected to a long, coiled oviduct (fallopian tube) that transports the ovum toward the uterus and serves as the site of fertilization.

A unique feature of the rabbit is its duplex uterus, where two completely separate uterine horns are present, each leading to its own cervix. This adaptation allows rabbits to carry multiple embryos efficiently. The cervices open into a single vagina, which leads externally through the vulva.

This reproductive system supports the rabbit’s high reproductive capacity and plays a crucial role in ovulation, fertilization, implantation, gestation, and parturition.

Female Reproductive System of Rabbit

This 3D model represents the heart and lungs of a rabbit (Oryctolagus cuniculus), created with a focus on anatomical accuracy and educational clarity. The model demonstrates the close anatomical relationship between the cardiovascular and respiratory systems in a small mammal.

The heart shows realistic external morphology, including atrial and ventricular regions, while the lungs display correct lobation, size, and positioning relative to the heart. Together, these organs help illustrate how oxygenated blood circulation and respiration are functionally connected in mammals.

Rabbit Lungs

This cafe is more than just a 3D model. It's a metaphorical snapshot of the time I spent at Retry School during the daily challenge (dailies). Every detail here breathes the atmosphere of learning: imagine this as the place where we all gathered after tough assignments, shared experiences, and simply connected.

The staircase leading to the cafe represents our journey of leveling up our skills. Each step is a stage we’ve passed—a new tool learned, a challenge overcome. This project became more than just schoolwork for me; it’s a symbol of growth and community.

This work was based on the concept art by artist Hyun-Jae Lee.
Original concept: https://www.artstation.com/artwork/VgVqnN?utm_source=Pinterest&utm_medium=organic

cafe

With shape keys as a Damage

INVIZ IS DISCONNECTED WITH BOOM

Cameraman Advanced

A ladder frame chassis is a strong structural design made of two parallel longitudinal rails connected by cross members. It is widely used in trucks and SUVs because of its high load-carrying capacity and durability.

https://youtu.be/zdn_IGCxHaQ

LADDER FRAME CHASSIS WITH MOUNTING

Another scan of the bone which is already in my collection.
Here I tested the new automatic turntable made by 3DMakerPro that is connected to the TOUCAN 3D Scanner.
With 50 frames per aspect and four aspects (scans), the quality of the model is better than 0.2mm regarding the resolution.
In my opinion a very good addition to the scanner.

Cervical vertebra (Toucan + Turntable)

Demonic Fantasy Twinblades — a high-quality stylized melee weapon set connected by a heavy dark iron chain.

This Diablo-inspired asset features a unique dark fantasy design with blood-red accents and worn metal textures. Perfect for fantasy RPG characters or boss fight encounters.

Model was created in blender and substance painter . Exporeted in FBX format .

Demonic Twinblades - Stylized Weapon | FREE

## Scanning
Scanning was done in sPC connected mode (WiFi, with latest update 120FPS speed) at a moderate high point distance of 0.15mm (can go up/down to 0.05mm but at 0.15mm it already resulted in a 20M triangle file...) until target quality was reached. Keep an eye on ideal scan distance since it reduces with increasing point distance. When you are too far away scanning will be drastically slower compared to when you're in the ideal distance. 

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to align using automatic feature alignment (after deleting all unnecessary data from around the object). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

Wax Statue Virgin Mary - Einscan Rigil

## Scanning
Scanning was done in PC connected mode (WiFi, with latest update 120FPS speed) at a moderate high point distance of 0.15mm (can go up/down to 0.05mm but at 0.15mm it already resulted in a 20M triangle file...) until target quality was reached.
I placed the casting on bed of marker cards and geometries so I can also capture the sides of the casting which I also use for aligning the two scans I created (top and bottom). The scan itself was performed with both cross and parallel line mode taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
When finishing the single scans it already creates a point cloud so I only had to align using automatic feature alignment (after deleting all unnecessary data from around the object). Afterwards I used Quicksurface to align the scan to the coordinate system and reduce the triangle count to a manageable 4M triangles.

资源库

关于这些资源