Free 4K model. Simple wooden table with warm brown grain, worn edges, light scuffs and varnished sheen - rectangular top on four straight legs.

Wooden Table 02

Free 8K modular airduct set: realistic rectangular metal vents, elbows, joints and grilles. Industrial, workshop/warehouse-ready with detailed, worn-metal finish

Modular Airduct Rectangular 01

Free 8K model of a contemporary rectangular coffee table with textured stone top, warm wooden frame and angular wood inlays.

Modern Coffee Table 01

Free 8K wicker basket model with hand-woven twine, dark weathered wood tones, tight rectangular weave, braided rim and realistic grain with subtle wear.

Wicker Basket 01

Free 8K model of a contemporary rectangular coffee table with a dark stone base and intricate concentric wooden geometric inlay, deco-inspired, clean finish.

Modern Coffee Table 02

Free 8K model - tall modern painted ceramic vase: rectangular clay pot with subtle exterior texture and fancy decorative style.

Ceramic Vase 03

Material: terracotta; made (1571-1631) by Louis-François Roubiliac, slightly to left, wearing a doublet, cloak and large ruff, attached to a rectangular painted stone socle of waisted form.

Model updated by Thomas Flynn 05/05/2016:
Canon G7x, 134 photos, Agisoft PhotoScan

Portrait bust of Sir Robert Bruce Cotton

Not far from the Nuraghe Losa, we find one of the best-known and most fascinating monuments in Sardinia: the well temple of Santa Cristina.  This underground temple certainly represents one of the peaks of nuraghic architectural mastery. It is constructed of perfectly squared stone blocks forming an access stairway leading down into a chamber with corbelled ceiling of exceptionally good workmanship. The water still today reaches the bottom of the chamber, filtering through its walls. Near the meeting hut there are some rooms with square, rectangular and circular ground plans, only the bottom courses of which remain: almost certainly these were lodgings for the priests of the water cult and the pilgrims, but there must also have been small sales stalls for the market held on the occasion of religious celebrations. The site was in use from 1200 to 700 BC. www.arkeosardinia.it

Santa Cristina di Paulilatino (OR)

Granitic gneiss sphinx of the ram of Amun protecting figure of Taharqo between folded front legs; the rectangular base, which has been partially restored, is inscribed with a continuous horizontal register of hieroglyphs.

COL: https://www.britishmuseum.org/collection/object/Y_EA1779

Created by Daniel Pett using a OnePlus3 mobile phone from 199 photos.

Statue of the ram of Amun

Hi guys,
Here we have a vintage style living room. Walls are made of mahogany material, with a little bit of rectangular carving on it.
The ground is decorated with a Middle Eastern-style rug, and the randomly placed sofas and coffee tables make guests feel relaxed and friendly.
Lightings and shadows of this scene have already been baked, and the effect will be even better when rendering in game engines like Unreal Engine.

The other half of the room we left blank space

Hope you like it

vintage living room

Modeled after the  Chapel of the Archangel Michael in Kizhi Island of Karelia (Russia), with a few elements from the Chapel of the Holy Face.

The Chapel of the Archangel Michael was moved to Kizhi in 1961 from the Lelikozero village. It measures 12.0×3.0×11.0 metres and has a rectangular frame elongated from east to west and a two-slope roof. Above the entrance hall there is a belfry capped with a pyramid roof. The iconostasis of the chapel has two tiers and contains icons of 17th–18th centuries

![](https://upload.wikimedia.org/wikipedia/commons/thumb/b/bf/Kischi_Kapelle.jpg/697px-Kischi_Kapelle.jpg)

Karelian Orthodox Chapel

Photogrammetry 3D model of a Chinese Bronze "Ding"
It is a model of a small copy that I found on a tourist market in Bejing

Ding were prehistoric and ancient Chinese cauldrons, standing upon legs with a lid and two facing handles. They are one of the most important shapes used in Chinese ritual bronzes. They were made in two shapes: round vessels with three legs and rectangular ones with four, the latter often called fanding. They were used for cooking, storage, and ritual offerings to the gods or to ancestors.

Re-uploaded with 1M faces

Chinese Bronze Ding Vessel

A highly detailed 3D sculpture of a majestic horse captured mid-gallop, mounted on a low rectangular stone plinth. Inspired by classical public art monuments, this piece showcases powerful muscular anatomy, dynamic motion, and finely sculpted mane and tail flow to emphasize strength and elegance.

The statue features a smooth bronze material with subtle surface variation and a natural green patina, adding realism and timeless character. Designed with clean manifold geometry and optimized topology, this model is suitable for real-time rendering and outdoor decor visualization.

Perfect for:
• Public park environments
• Architectural visualizations
• Historical or classical scenes
• Game environments
• Outdoor monument renders

Technical Details:
• High-resolution 8K textures
• Clean topology
• Manifold mesh
• Optimized for Sketchfab real-time viewing
• PBR workflow ready

**Made with Ai**

Horse 3D sculpture

Modular Weathered Terracotta Roof Section_R2.0 f2

A high-detail, modular roof section featuring weathered clay terracotta tiles. This rectangular architectural asset is designed for easy tiling and integration into larger structures, making it perfect for environment artists and game developers.

Key Features: Style: Realistic, weathered texture with a high-detail surface. Optimization: Low poly construction, ideal for game engines and real-time rendering. Versatility: Modular design allows for seamless placement in architectural scenes. Material: Authentic terracotta clay aesthetic, suitable for Mediterranean, historical, or rustic environments. Perfect for use in building modular houses, villas, or historical dioramas.

Modular Weathered Terracotta Roof_R2.0 f3

A farm goat—known to enthusiastic pasture naturalists as Capra nibblus mischiefii—is the resident troublemaker of rural life. Agile, curious, and powered by an unshakable belief that everything might be edible, it hops onto rocks, logs, tractors, and occasionally places it absolutely should not be. Its bleats punctuate the day like quirky commentary, and its rectangular pupils give it a wise‑yet‑chaotic stare. Whether trimming weeds, testing fences, or investigating pockets for snacks, the goat brings a spark of playful energy to the farm’s daily rhythm.

Farm Goat

Actualmente el edificio se conserva en ruinas. Aunque bastante deterioradas, restan en pie las cuatro paredes que revelan una estructura de planta cuadrada realizada en mampostería. Se construye en tres alturas. En las dos superiores hay una distribución regular de vanos de forma cuadrada, que proporcionan la ventilación necesaria para secar el papel en la última etapa del trabajo. La planta inferior consta de tres vanos de acceso en su fachada principal. Los laterales son sencillos vanos rectangulares, mientras que el central es un vano en forma de arco de medio punto adovelado. Sobre la clave del arco figura la fecha de fundación de la fábrica -1793- grabada en una loseta ornamental. A su vez, en la segunda planta y sobre el vano de acceso, en lugar de localizarse el vano de iluminación que correspondería, hay una hornacina destinada a la colocación de una imagen religiosa. En la fachada posterior encontramos un vano secundario de acceso realizado en forma de arco carpanel.

Fabrica de Fort - Teruel | SPAIN

A microwave oven is a compact kitchen appliance designed for quickly heating, cooking, and defrosting food using electromagnetic waves called microwaves. It features a rectangular metal body with a front-opening door, usually fitted with a transparent mesh window for safe viewing during operation.
Inside, the oven includes a rotating glass turntable that ensures even heating of food. The interior is typically coated with heat-resistant material for durability and easy cleaning. On the front panel, there is a control interface consisting of buttons, a digital display, or rotary knobs that allow users to adjust time, power levels, and cooking modes.
Microwave ovens operate by generating microwaves that excite water molecules in food, producing heat internally rather than from an external source. This makes them energy-efficient.
The exterior design is usually sleek and modern, available in various finishes such as black, white, or stainless steel, making it suitable for contemporary kitchens.

Microwave Oven with basic internal Components

Futuristic loot chest concept brought to life in 3D.
This asset was based on a concept generated with AI and then fully modeled by me, refining proportions, shapes, and functional details to give it a clean, game-ready sci-fi look.

The design explores a compact rectangular chest with hard-surface panels, beveled edges, and emissive orange lighting to suggest energy, rarity, and reward. The open lid version was created to emphasize the moment of discovery, with a strong glowing interior that enhances its use as a stylized interactive prop for games, cinematics, or real-time environments.

Sci-Fi Loot Chest - 3D Game Asset

A full-length khaki-brown leather coat is centered in the frame against a neutral gray background. The coat features a large, fluffy, taupe Mongolian fur collar and cuffs. A matching leather belt cinches the waist, with a rectangular buckle. The coat is buttoned up, with visible buttons down the front. The sleeves are long, with the fur cuffs extending past the wrists. Game ready.

![](https://user.uploads.dev/file/fe18ea437c2f7900fff30b5c7ebab58f.webp)

Khaki Brown Leather Coat with Taupe Fur Trim

A minimalist 3D coffee mug with a smooth ceramic finish, placed on a textured rectangular surface. The mug features a simple cylindrical body with a curved handle, designed for everyday use. Its clean geometry and glossy material give it a realistic, modern look, making it suitable for product visualization or portfolio presentation.

Cofee Mug

Terracotta gladiators figurine showing a Thracian fighting a Hoplomachus.

Terracotta group of two gladiators fighting, each wearing brimmed plumed helmet, each armed with small shield on their left arm (left-hand figure holding round shield, right-hand figure holding square shield with central rib) and straight sword in their right hand. Figure to spectator's right raising his sword-arm and delivering a thrust to the neck of his opponent. Light greyish-brown clay (with occasional calcite inclusions (with mica), red and blue on helmet of left-hand figure, red on lower right leg of left-hand figure.

Both these types of gladiators had distinctively small shields. The Thracian's (right) was rectangular, that of the Hoplomachus was round. The Hoplomachus could also be armed with a spear.

Roman, 1st-2nd century CE. Made in Smyrna or Myrina, Turkey.
Height: 13.50 centimetres, 5.31 inches.
British Museum (1907,0518.4)

3D Printable | IA Design

Terracotta gladiators | 3D Printable

For proper use, we recommend downloading the Original format.The Converted version is intended exclusively for browser preview. In the source file, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ accurate texture maps✔ proper object namingIf you intend to use the asset in a production environment, choose the source file.A vibrant cluster of small blue blossoms with lush green foliage displayed in a contemporary rectangular stone planter set against a dark background for a clean and sophisticated look.

Blue Flowers

Rectangular hieroglyphic block carved with twelve glyphs framed by a perimeter band. It is classified as a escalinata. The text contains abundant calendrical information, including distance numbers that relate two Calendar Round positions associated with the accession of an Ajaw and the celebration of a five-tun period ending (Camilo Luín, 2012).
 IDAEH Cultural Property No. 1.2.179.0001
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

Stair riser from Itzán

A 3D model of a classic heavy duty steel rim. This wheel features a robust and functional design with eight simple rectangular cutouts perfect for industrial vehicles classic trucks vintage buses or any project requiring a utilitarian and realistic look. The model is built with clean topology and includes basic materials making it a versatile and easy to use asset for your Blender scenes.

资源库

关于这些资源