The Mercedes-Benz 300 SL (chassis code W 198) is a two-seat sports car that was produced by Mercedes-Benz as a gullwinged coupe (1954-1957) and roadster (1957-1963). It was based on the company's 1952 racer, the W194, with mechanical direct fuel-injection which boosted power almost 50% on its 3-litre overhead camshaft straight-6 engine. Capable of reaching a top speed of up to 263 km/h (163 mph), it was both a sports car racing champion and the fastest production car of its time.

The 300 SL was inspired by Max Hoffman, Mercedes-Benz's authorized United States importer at the time, who correctly perceived a large American market for such a car. The company introduced the 300 SL in February 1954 at the International Motor Sports Show in New York instead of in Europe in order to get it into U.S. buyers' hands sooner.

Mercedes-Benz 300 SL Gullwing

🇬🇧🇺🇸 English-Usa: The MH-60 Seahawk is a United States Navy twin-turboshaft, multi-mission helicopter based on the UH-60 Blackhawk.

🇮🇩 Indonesian: MH-60 Seahawk adalah helikopter bermesin turboshaft ganda, multi-mission dari AL Amerika Serikat yang didasarkan dari UH-60 Blackhawk.

🇷🇺 Russian: MH-60 Seahawk-это вертолет двигателя с двойным турбоссафтом, мультипад Соединенных Штатов на основе UH-60 Blackhawk.

🇰🇵🇰🇷N.Korean-S.Korean: MH-60 Seahawk는 UH-60 Blackhawk을 기반으로 한 미국의 듀얼 터보 샤프트 엔진 헬리콥터입니다.

🇯🇵 Japanese: MH-60 シーホークは、UH-60 ブラックホークをベースにしたアメリカ海軍のツイン ターボシャフトのマルチミッション ヘリコプターです。

🇸🇦 Arabic: MH-60 Seahawk هي طائرة هليكوبتر متعددة المهام تابعة للبحرية الأمريكية ذات عمود توربيني مزدوج، تعتمد على UH-60 Blackhawk.

SH-60B Seahawk Helicopter

Free 8K model - weathered metal crowbar with chipped paint, rust and grime; bent shaft and worn pry/nail-puller ends.

Crowbar 01

Making progress on underwater scenes ( but still more to come :) ) !

[Original scan](https://skfb.ly/6suDz) from @ariosgeo, and inspiration from [Il Cristo degli Abissi](https://goo.gl/RU5PtJ), a submerged statue of Jesus in Italy.

**Modeling**:

* The scan was remeshed with [mmgs](http://mmgtools.org) from 500k verts to 7k, keeping the face and hands at a higher resolution.
* The ocean surface and ground were created with blender's ocean modifier.
* Light shafts are simply a randomized array of elongated planes.
* The fish is a lowpoly model ( a 30s model ).
* A particle system was created for fish instances, with force fields applied (boids physics, vortex, attraction force and collision on the statue)

**Texturing/lighting**:

* Mix of concrete and coral on the statue
* Sand on the ground
* Nothing on the sea surface
* Radial opacity for ground and surface
* Voronoi textures baked as emission on the statue and the ground, to simulate the light deformation through water
* Lots of color processing

Christ of the Abyss

Free 4K model: weathered flathead screwdriver with carved wooden handle, corroded ferrule and worn steel shaft bearing paint marks and realistic workshop wear.

Flathead Screwdriver

Flexible 17-piece kit for building ventilation shafts. UV-mapped with basic texture included.

Vent Collection

Hello Guys, I'm Back, with one of my favorite Motorcycles, the Yamaha R1.

Model's from GTA San Andreas Mod:
https://www.gtaall.com/gta-san-andreas/bikes/249573-yamaha-yzf-r1-2022.html
Why? Because I found an addon called "DragonFF - Master" and "Blender DFF" that can import and export .dff files (used in the 3d era of GTA) and I found it hard to install any high quality games on my new laptop, so, I downloaded that mod, used that .dff to convert from "GTA accessible only" model to "Blender accessible" model, which took some time to familiarize with Blender 4.0, and remembering old techniques, it has been a linear learning curve, but here it is.

Thanks to Underground_47 [https://www.gtaall.com/profile/underground47/] for making these mods, you rock man!

This is the 2022 Yamaha R1 with the 998cc Liquid-cooled Inline 4 with a Crossplane Crankshaft putting out almost 200HP and 112NM of Torque, one of the craziest and NASCAR'ish sounding bike.

Thank you and see you again with another one.

2022 Yamaha R1

Originally created with Blender 3.

This model was designed for use as a real-time asset in a video-game or simulation or rendering.

This model contains separate objects. (like Base, Shaft, Capital)
File Formats:
- blend
- OBJ
- FBX (Multi Format)

Please like it. It give me motivation to continue.

3D Columns Collection of 6 models

This is a fully textured 12 story building model with uv mapped slots of a commercial building. designed with grid columns and central core for structural stability. An open space concept with which can  be interior space planned. includes interior stairs, lift shaft and washroom space. free for download. renders animations and refrence.

site req: 30mx30m2
designed with 1m x 1m space module
lift shaft: min/max 3m x 6m (per 1 lift and mech)
stairs: Min/max 900mm width x150mm riser
floor plate datum: 3000mm min/max
total stories: 12+roof mech.

Big Square Commercial Building

This is a modular enviroment scene that was created for my second assessment at AIE where we needed to create six+ objects to build a modular scene and texture it. I tried to achieve a wow/diablo feel to my scene in a PBR workflow.

Here is the desciption I wrote for the scene at the begining of the saaseesment:

An old and forgotten crypt, a shaft of moonlight coming from a hole in the ceiling falls upon a large stone coffin at the back of the room up a small set of stairs. The coffin has a banner lying on top of it as if marking a hero or a king, down the stairs is a larger room with a carpets running across the room. On some of the walls there is a arched inset with a candles and a plaque with some writing on it that cant be read correctly due to age and erosion. There is also banners placed around the room with a emblem on it perhaps representing a family or clan.

Crypt of Kings

Greetings! This is a simulation of a V6 engine, with a cylinder bank angle of 90 degrees and a lower position of the camshaft.
This model includes a comprehensive set of internal components that accurately represent the technical features of an actual engine. However, it does contain simplifications and discrepancies from real-world physical processes, as this is a gaming resource for my project.
In addition, the model includes an additional set of textures, which you can view here: and get here: https://skfb.ly/pDzry
If you have a suggestion for cooperation: Telegram https://t.me/przheva.

V6 car engine with engine [MoreThem]

Always thouht this guy looked cool, scanned him on the way to the office today. Not sure who / what he is!

Edit: @jeremielouvetz tells me this is a "Mascaron" which is "is a face, usually human, sometimes frightening or chimeric whose function was originally to frighten away evil spirits so that they would not enter the building." ~ https://en.wikipedia.org/wiki/Mascaron_%28architecture%29

On the same building / block as the Shaftsbury Theatre.

Streetview: https://goo.gl/maps/GGwT1ax5KjJ2 

Map: https://goo.gl/maps/bfpbsFPBwjN2

Architectural Ornament, Shaftsbury Av., London

Free 4K model. Ornate medieval mace with flanged, studded head, twisted spiral shaft and aged iron-silver finish, detailed rivets and worn patina.

Ornate Medieval Mace

Free 8K model - ornate medieval war hammer with spiked poll, flanged steel head, brass inlays and wood shaft; great for knights, fantasy and historic props.

Ornate War Hammer

A London Underground ventilation shaft disguised as a shelter in the north east corner of Bethanl Green Gardens, London.

602 photos taken in April 2021 with a Sony a6000 and processed in Reality Capture.
Roof reconstructed using Microsoft Bing aerial photos as reference.

Bethnal Green Tube Vent

Recumbent 15th-century chamfered cross-slab grave-cover measuring 1.9m long by 0.09m thick, the base of the slab measures 0.64m wide which narrows to 0.54m, in the south-east corner of the chancel of Portumna Dominican Friary church (GA127-019----), Co. Galway. Chamfered slab the top of which has a sunburst-motif with human face representing Christ flanked by a serpent/monster with open jaws, dotted body and curving tail which runs across onto the the sunurst motif.  A triangular-shaped motif above the open jaws may represent the tongue of the serpent with fish beneath. Above this there is an eight pointed encircled rosette and an eight armed encircled cross between which there are two human heads above which there is a base for the shaft of the central cross.  Two four cornered knots either side of the shaft of the central cross which forms the centre of six rows of three encircled crosses with vine leaf terminals representing the blood of Christ.  For more details visit: https://tinyurl.com/56hwrtac

Portumna Graveslab (GA127-019001-)

Stone cross (H 0.88m; arm span 0.7m) with fleur-de-lis/leaf-and-bud terminals standing in southern quadrant of Portumna Abbey (GA127-019----) graveyard (GA127-019013-), Co. Galway.  The centre of the cross head as has a lozenge shaped hole in the centre. The chamfered shaft is octagonal in plan. The cross stands in an octagonal-shaped base (int. dims. 0.45m N-S; 0.45m E-W). For more details visit: https://tinyurl.com/498hreta

Portumna Abbey Cross (GA127-019011-)

Recumbent graveslab (L. 1.89m x top Wth 0.71m/base Wth 0.71m x T 0.1m) with Latin cross and fleur-de-lis terminals, in the chancel of Portumna Dominican Friary Church (GA127-019----), Co. Galway. One of five recumbent graveslabs in the chancel of the Dominican Friary Church. Faint traces of an inscription either side of the shaft of the floriated -cross.

Portumna Abbey Graveslab

3D scan of  male figure that represents Porifera. Porifera is a phylum that belongs to the Kingdom Animalia and is commonly known as sponges. Sponges can be seen on the shaft of the dynamically posed sculpture.

The figure was created by Rudolf Weyr (1847-1914) and is part of the decorative program in Hall X of the Natural History Museum.

**Object**: Figure embodying Porifera

**Collection**: Natural History Museum Vienna (contact: Stefanie Jovanović-Kruspel)

Find out more about the NHMW [here](http://www.nhm-wien.ac.at/en).

Scanned and edited by V. Winkler & A. Haider (NHMW)

Scanner: Artec Leo

Contribution to the digitization project „Einsichten in die gesellschaftspolitische Dimension des NHMW über die Jahrhunderte von der Prägung des Wissenschafts-Verständnisses bis zum Nationalpark in der Lobau“ funded by the [BMWKMS](https://www.bmwkms.gv.at/).

Figure embodying Porifera

The Honda CB125 is a 122 cc (7.4 cu in) motorcycle made by Honda from 1971 to 1985 (1973–1985 in the US). It had a single-cylinder overhead camshaft (OHC) engine with a 9500 rpm redline. The "S" model was produced from 1971 to 1975 and was replaced in 1976 by the "J" model (the US bikes retained the S designation). The newer model sported a two-piece head, 124 cc (7.6 cu in) displacement, and a larger carburettor.

Made In Blender 4.3 and Textured In Substance Painter

Honda CB 125 1972ish (Custom Engine)

15th-century recumbent floriated cross-slab grave cover measuring 1.97m long by 0.55m top width which tapers to a base width of 0.51m by 0.05m thick, in the northeast corner of the chancel of the Dominican friary church (GA127-019----) in Portumna, Co. Galway. Slightly tapered chamfered graveslab, which is broken in two pieces, decorated with a floriated Latin cross in low relief. The shaft (Wth 0.14m) and arms of the cross are decorated with vine leaf or fleur-de-lis/bud and leaf motif.  A four leaf cross is visible at the top of the cross shaft and forms the arms of the cross. The base of the cross rises from the open jaws of a dragon with four-leaf cross above the head of the dragon. For more details visit:  https://tinyurl.com/bd4uxjre

Portumna Graveslab (GA127-019003-)

Yamaha XJ 650 - 1980
4-stroke, 4-cylinder, air-cooled, transverse engine - 653 cc - 73 hp/9000 rpm - DOHC, chain-driven - 2 valves per cylinder - 4 x 32mm Hitachi vacuum carburetors - electric starter - 5-speed gearbox - shaft drive - double cradle frame - front disc brakes - 108 kg - 198 km/h
My first motorcycle, a gem that unfortunately ended up crashing into a car that cut me off. I was driving without a license or insurance, so no reimbursement! A nostalgic memory!

My First Motorbike Yam 650XJ

Recumbent 15th-century chamfered cross-slab grave-cover measuring 1.91m long by 0.09m thick, the slab measures 0.88m wide which tapers to 0.74m, in the centre of the chancel of Portumna Dominican Friary church (GA127-019----), Co. Galway. The floriated Latin Cross is framed within a floriated border.  The shaft of the cross rises from an animal/possible lion based on possible depiction of mane running around the face of the animal.  Described in the Urban Archaeological Survey of County Galway as 'a slab, bears a Latin cross in low relief. The cross shaft (Wth 0.19m) is decorated with a repeated floral motif and there is a knotwork circle near the crossing. Each arm consists of a square panel: that to the S bears a Greek cross which was formed by subdividing the square into four segments decorated with fleur-de-lis motifs. The panel to the N has one large rosette.  An inscription below the N arm reads ‘HERN(?)LI’.  For more details visit: https://tinyurl.com/4fcx6msj

Portumna Graveslab (GA127-019002-)

Peppe Shoes is known for their handmade Italian leather shoes that stand out for their quality and unique designs. The Modello Vanesso is a particularly eye catching model that has some interesting features Hand painted leather Each pair is hand painted by professional shoemakers giving each shoe a unique look. High quality material Only first class Italian leather is used including cowhide calf leather and goat leather. Eye catching design The Modello Vanesso comes in a bright yellow and has a high shaft that provides extra style and comfort. Comfort and fit These shoes are designed to be comfortable and fit well. I hope you have fun with the Blender model and may your scenes be successful.

资源库

关于这些资源