hi friends, ive made this model for a few reasons, first as a thank u to all the friends who have supported me so far, and also to see if ive gotten any better at not so low poly modeling, also cuz mori is very cute , whew i was confused the whole way up while making the model, hope ya friends like it , im thinking i may update the model latercuz the rig, whewwww totally a rushed job, still im kinda pleased on how it ended up looking, and maybe make a kiara or something like that whew

anyway, thank u friends for the support ive gotten so far, i wanna give this model so all frens can play with not so low poly mori and have fun and stuff!

Kawaiope

"From death comes life" were the final words of this katana's wielder. This katana was used to put an end to unneeded violence and making the world a more peaceful place. But in the end, before the wielders dream was realized, he also fell victim to this unneeded violence.


The katana is infused with a cherry blossom, which stands for a time of renewal.


I made this katana initially because I was watching Demon slayer and got inspired to make my own katana, after starting this project I dropped it pretty soon. But after I started watching One Piece, I felt motivated again and finished this project with a lot more than I initially planned. I first only cared to make the katana but later I found I wanted to make the Saya (cover) and the katana stand as well.


This model is not intended for a game, but could be used in one. If you want to use it in a game, I would recommend baking the Tsuka wrap onto the Tsuka handle (The Tsuka wrap is 25k poly's). This would make the performance a lot better.

Blossom Katana

hacklord 1x1x1x1/shedletsky

The Marceline Sentinel Armour, or better known as a Marcy, is a prototype military exosuit that is used on one-way-ticket missions as a last-ditch-effort, where the pilot’s body (who would otherwise be out of commission from injuries) is infused with the armour and becomes one with it. Marcies are brutal, but good at their job. None have returned from duty to date.

The mech has been modelled in both Zbrush and Maya, and then has been taken into Substance Painter for baking and texturing using a PBR pipeline workflow. The mesh was then rigged and animated in 3DS Max.

Artstation Link:
https://www.artstation.com/artwork/1NLy9G

Created for a university assignment, 2024

Free download available - please credit for repurposed work :)

Animated Mech - Marceline Sentinel Armor (Marcy)

An alarming crossing sign wakes you up. Having no recollection of where you are or how you got here, you feel confused. An empty train station surrounded by a calm ocean as far as the eye can see. In the distance a red box gradually increases in size. You make it out to be a train riding on top of the water as it gets closer. Once it neared the station, the train comes to a complete stop at the platform's edge, letting out a bellowing whistle of steam. The doors unlatch and invitingly open themselves. You patiently wait for people to get off, but realize that there are no passengers onboard. Something in your head urges you to step into the train. Do you choose to part take on this journey?

Nazo no eki (Mystery Station)

i got confused on the naming of the map, this is spin go round, humble stumble is trampoline based

stumble guys spin go round map

completely camoflauged, not to be confused with the purple hair girl from ddlc

yuri 1337

## Scanning
The scan was created in large IR-mode with automatic exposure and geometry tracking. I started from the front and slowly moved around the part while keeping an eye on having enough overlap for tracking (rotating the scanner to reach in to the crevices works quite well to circumvent obstructions due to limited line of sight). While scanning the framereate was roughly 10 FPS with some highs to 15 and lows to 6 FPS (NIR mode still needs an update I guess, currently no marker scannign supported).

## Post-Processing
For post processing I fused the scan at 1mm and and meshed it it with default settings. For alignment I used the untegrated tooling in Creality Scan (basically rotating the part until alignment is right). The figurine then was printed from PLA to create a minature version.

Angel Figurine (Tombstone) - Creality Sermoon P1

This is the body that refused to load with the actual car so for wright now there to separate documents but I will work hard to make sure that the whole car loads in!

Mustang Funny Drag Car

Schedel van een resusaap *(Macaca mulatta)*. Het betreft een jong individu gezien de nog niet geheel doorgekomen snijtanden en het niet volledig vergroeide schedeldak. Gevonden in de Vecht, gemeente Weesp (2011).

*Skull of a rhesus macaque (Macaca mulatta). It concerns a young individual, as indicated by the not yet fully erupted incisors and the not completely fused cranial vault. Found in the River Vecht, municipality of Weesp (2011). *

Afmetingen-measurements (cm): 6.0/9.0/-

<a href="https://hdl.handle.net/21.12153/obj57383">Collectie Archeologiemuseum Huis van Hilde PNH 10397-01</a>

Model by Archeologiemuseum Huis van Hilde (Kees Zwaan).

![](https://collectie.huisvanhilde.nl/imageproxy.aspx?server=10.0.10.211&port=17502&width=600&height=451&filename=images52/images_public/resusaap.jpg)

*Rhesus macaque (Macaca mulatta) by www.dieren3.webnode.nl*

Schedel resusaap | skull of a rhesus monkey.

He lay broken on the blackened shore, the air itself aflame around him. The river of lava spat and roared, its heat searing what little flesh the duel had spared. Limbs severed, cloak burning away to ash, he could do nothing but scream—at the fire, at his former master, at a galaxy that seemed to recoil from him. The ground trembled beneath him, mirroring the fracture within his soul.

Once the Chosen One, he now felt only the cold clarity of betrayal and the hollow echo of his own choices. The dark side, which had promised power enough to defy death, offered no relief from this agony. As the flames licked closer, pain became everything—body and spirit fused in torment. On that molten shore, Anakin Skywalker burned away, and something far darker waited to rise from the ashes.

SWJA Movie Duels: Darth Vader(Burned)

The Silver Dollar Piranha (Metynnis Argenteus) clearly seems piranha-ish but not the same family as the red belly piranha, or any of the Serrasalmus, thats prolly why the latin name mentions  a different family, namely Metynnis, its silvery color explains the Argenteus (Silver) but im still confused why its rare red stripe or line has not been taken into account when naming it, cause it is so striking for correct identification. Very beautiful fish, if you manage to not fall asleep watching it. Maybe its discoverer did just that ha

Silver Dollar Piranha (Metynnis Argenteus)

**game: Carnivores 1 / 2**
"Not to be confused with Branchiosaurus."

Brachiosaurus was a very large sauropod dinosaur. It was originally the largest animal in the Carnivores series, featured in Carnivores 2 and Carnivores: Dinosaur Hunter, and cannot be visibly killed. It is usually found in or very near water, eating aquatic plants.

**reality**

Brachiosaurus altithorax ("high-chested arm lizard"), spelled brachiosaurus, is the only known species of the extinct genus Brachiosaurus of brachiosaurid sauropod dinosaur, which lived during the Late Jurassic, approximately 154 to 153 million years ago, in what is now North America.

Brachiosaurus

## Scanning
Scanning was done in standalone mode at highest resolution (0.2mm, PC connected can be higher) and until target quality was reached. I placed the casting on bed of marker cards and geometries so I can also capture the sides of the casting. The scan itself was performed with all three laser modes taking roughly 5min for scanning. No scan spray was used for scanning.

## Post-Processing
I imported the scan project to my PC over USB and then fused the scan at default settings (0.2mm). Afterwards I used Quicksurface to align the scan to the coordinate system.

Wax Casting of Woman - Creality Sermoon P1

Wax Casting of Figure - Creality Sermoon P1

GMOD Rip.

It's got the interior textures, No Lights though.

Please don't give me greif because i TRIED.

With that being said, here's a free SUV (i know, it look poopy), you can fix it. I didn't make it but feel free to use it for anything.

Since it does have the wheel, safe to say it's good for a car. The windows are fused togheter, so thats an issue.
 67

2013 Infiniti FX50

A squat, muscled amphibian-horror squats on its stone dais like it owns the air above it. The head is all wet menace—wide mouth, bared teeth, and a gullet made for shouting curses into the dark—while the body reads as something half-primate, half-toad: long arms, hooked claws, and a curled tail that never quite relaxes. Beneath it, the base looks like river-rock fused into a single mass, split by eerie blue vein-lines and slicked with sickly green seepage, as if the ground itself is infected. Put it in a ruin, a sewer mouth, or a jungle shrine: it’s the kind of guardian that doesn’t “watch”—it dares you.

Croakmaw Perchfiend, a rock-throned swamp demon

Since you mentioned a **"Nano Laser Gun"** and asked for a description for the image we've been working on, here is a high-tech listing you can use for Sketchfab or CGTrader.

---

## **Title: N-1 Projector | Ultra-Compact Nano Laser Sidearm**



The **N-1 Nano Laser** is a sleek, ultra-modern sidearm designed for covert operations and high-tech sci-fi environments. Unlike traditional ballistic weapons, this model uses a concentrated nano-fused light core to deliver precision strikes.
The aesthetic features a **"Cyber-Grid"** finish with a carbon-fiber frame and integrated cooling vents that glow with reactive neon energy.
* **Geometry:** 8,500 Polygons (High-performance optimization for VR/Mobile/Desktop).
* **Texturing:** 4K PBR Workflow (Physically Based Rendering).
* **Materials:** Includes dedicated **Emissive Maps** for the signature neon glow.
* **Physics:** Separated parts for the trigger, safety switch, and energy cell for easy animation rigging.
* **File Formats:** FBX, OBJ, GLB/gltf.

Futuristic+gun+3d+model

Electronic bells used for Railroad/Level Crossing signal installations. 

NOT to be confused with a bazooka round or a pipe grenade.

(TF2) Italian E-Bells

Lighthouse is a table lamp that combines elegance,
lunar symbolism, and artisanal tradition. Its luminous
circle evokes the shape of a grain sieve, an ancient
tool from the Sicilian countryside, reinterpreted in a
contemporary key. The soft, diffused light creates
a warm and enveloping atmosphere, perfect for
enhancing any area of the home.

It is ideal for those seeking an elegant decorative
element, with moon references and a design inspired
by Sicilian tradition.
Dimensions: 330x 330x 92mm
Aluminum body: gilver, matte black, grey.*
LED light : integrated , warm white 2700k.
Diffuser discs in 100% recycled PMMA
and recyclable illuminate two sides.
LED technology dimmable 10-100%
On|off button and dimmer on the cable.
*Please check our website for new colors.*Please check
our website for new colors.

Lighthouse lamp - Second-Studio

小皮埃爾·勒格羅創作的《聖多馬》雕像（約1703–1711年）位於羅馬拉特朗聖若望大殿。該雕像是教皇克萊門特十一世為填補博羅米尼設計的十二使徒壁龕而委託製作的大型系列之一，由葡萄牙國王彼得二世贊助。勒格羅是唯一未完全遵循官方設計指南的雕塑家，其最初的巴羅克風格陶土模型情感強烈，但未被採納。最終的大理石像風格更為古典克制：聖多馬手持木工角尺，衣褶規整，其著名的手指從壁龕伸出指向祭壇，象徵在信仰旅程中對懷疑的超越

The Statue of St Thomas by Pierre Le Gros the Younger (c. 1703–1711) resides in the Archbasilica of St. John Lateran in Rome. It was part of Pope Clement XI's project to fill Borromini's niches with twelve colossal apostle statues, sponsored by King Peter II of Portugal. Le Gros was the only sculptor who successfully refused to work from the prescribed drawings by Carlo Maratta. His initial, highly emotional Baroque terracotta model was rejected. The final marble statue is more restrained: St Thomas holds a carpenter's square, with ordered drapery. His distinctive finger protrudes from the niche, pointing toward the altar, symbolizing moving beyond doubt on the path of faith.

聖多馬像St Thomas Statue in Laterano, Rome

A towering, humanoid dark knight with a skeletal frame and dual wings—one black and demonic, the other a corrupted golden angelic wing slowly turning holy. Clad in broken, spike-covered gothic armor fused with bones and a tattered, smoke-like cloak, this faceless figure wields a massive scythe integrated into its body. Featuring clawed hands and digitigrade legs, it exudes a blend of elegance, brutality, and supernatural horror. Ideal for dark fantasy, gothic, and epic horror games or cinematic scenes, embodying a fallen angel, death bringer, and monstrous knight in one.

Fallen Angel Demon Knight

## Scanning
The scan was created in IR-mode with automatic exposure and geometry tracking. I created two scans: one of the whole tombstone in large scan mode and one detailed one of the head in normal scan mode. I started from the front and slowly moved around the part while keeping an eye on having enough overlap for tracking (rotating the scanner to reach in to the crevices works quite well to circumvent obstructions due to limited line of sight). While scanning the framerate was roughly 10 FPS with some highs to 15 and lows to 6 FPS (NIR mode still needs an update I guess, currently no marker scanning supported).

## Post-Processing
For post processing I first transferred the scan data from the P1 to my workstation. I then fused the whole tombstone scan at 1mm and the high detail at 0.5mm. Fusion already creates a mesh so no need to mesh a second time (only needed when merging multiple scans or when you need texture mapping). For alignment and cleanup of the base I used Quicksurface.

Father and Child Tombstone Detail - Sermoon P1

Thomas The Tank Engine 

He's Basically The One That Started This Whole Thing. 

Some of The Parts on Thomas are Refused From Paulsvids' Thomas Model. 

Thomas and Friends is Owned By HiT Entertainment and Mattel.

Asset Library

About These Assets