Free 4K model of a rigged wooden colonial pinnace - ornate, weathered hull, detailed rigging and sails, perfect for maritime, pirate, or historical scenes.

Ship Pinnace

Free 4K medium Dutch wooden ship model, - ornate, weathered hull, detailed rigging and sails, perfect for maritime, pirate, or historical scenes.

Dutch Ship Medium

Free 4K model of a large, old Dutch wooden sailing ship - ornate, weathered hull, detailed rigging and sails, perfect for maritime, pirate, or historical scenes.

Dutch Ship Large 02

The Imperial-Class Star Destroyer of the Galactic Empire. If i remember correctly, this was also Darth Vader's personal flagship at one point (the Devastator).

As seen from my Reddit post;
https://www.reddit.com/r/blender/comments/u3baof/imperialclass_star_destroyer_from_star_wars_that/

As with my other star wars ships, this model was also modelled and textured in Blender and Microsoft Paint. JSPlacement was also used when creating the hull plating texture.

Edit; I was told that there were apparently 2 variants of this star destroyer; the imperial-I class, and the imperial-II class. I was also told that the one I have here resembles the imperial-II variant, but since I don't know the differences between variants, I don't really know.

Feel free to use this model for any of your personal projects!

Star Wars; Imperial-Class Star Destroyer

The Aleksander class frigate was the largest Russian archipelago navy class ship in 1790 on the Baltic Sea. Five of these ships took part in the Second Battle of Svensksund on July 9th and were lost (taken over, sunk, or burnt), while eight frigates in total were built during the war of 1788–1790 against Sweden. Aleksandr class frigates had a typical ship rig of the period. Aleksandr class is known as an archipelago or rowing frigate. The hull has nine smaller holes between gun deck main gun ports.

Hull dimensions:
•	Length at waterline: 39.60 m
•	Greatest width (breadth): 9.80 m
•	Greatest depth: 3.6 m

Project ship 01B, Russian Aleksander Frigate Class, Open sails, 9.5.2020, programs: Blender, Substance Painter, UE4

This model was created in the National Museum of Finland project "Historia eläväksi digitaalisella tarinankerronnalla" by Zoan Oy.

Aleksandr class archipelago frigate

Free 4K model of a large Dutch wooden sailing ship - ornate, weathered hull, detailed rigging and sails, perfect for maritime, pirate, or historical scenes.

Dutch Ship Large 01

This Model Has Been Data-Mined from Poppy Playtime Chapter 3 The Process Cannot Be Told
Huggy_Hullucination From Home Sweet Home

tags
Poppy playtime,poppy playtime chapter 3,huggy wuggy,catnap

Hallucination Huggy - Poppy Playtime Chapter 3

BMP-1/БМП-1 (Infantry fighting vehicle), Object 765
The tank designed to directly support infantry in combat, developed in 1966 and still in use today.
The tank can float at the rear.

Ps. updated hull normal map

Ps.s. updated tracks and reduced the number of polygons by 1/3

BMP-1/БМП-1 (Боевая Машина Пехоты)/ (Infantry fighting vehicle) ,Объект 765
Танк предназначенный для непосредственной поддержки пехоты в бою, разработан в 1966г и используется до сих пор.
сзади расположенно оттделение для десантирования пехоты. танк может плавать.

Ps. обновил карту нормалей корпуса

Ps.s. обновил гусеницы и на 1/3 уменьшил количество полигонов

I know how to use a translator, so everyone come in discord - https://discord.gg/hzwvJrwtqm

Patreon - patreon.com/buh_late (eng)

Boosty - boosty.to/buh_late (рус)

и телеграм - https://t.me/buh_hub

тг канал - https://t.me/buhHubLate

BMP-1 (outdated)

"We didn't think we could lose..."

The MCRN Donnager was a large battleship, almost 500 meters long and weighing approximately 250,000 tons. She has a large internal shuttlebay and two hull mounted railguns. The Donnager was the flagship of the Martian Congressional Republic Navy's Jupiter fleet. 

CC0 License
Original Author Chris Kuhn

MCRN Donnager (The Expanse)

The Aleksander class frigate Svjatoi Nikolai was the largest Russian archipelago navy class ship in 1790. The ship sunk in the Second Battle of Svensksund (Ruotsinsalmi) on July 9th 1790 and was rediscovered in 1948. Aleksandr class frigates had a typical ship rig of the period. Aleksandr class is known as an archipelago or rowing frigate.

Hull dimensions:
•	Length at waterline: 39.60 m
•	Greatest width (breadth): 9.80 m
•	Greatest depth: 3.6 m

Ship 01A, Russian Aleksander Frigate Class, Open sails, 9.5.2020, programs: Blender, Substance Painter, UE4

This model was created in the Maritime Museum of Finland project "Historia eläväksi digitaalisella tarinankerronnalla" by Zoan Oy and is part of Smoke on the Waves experience at Maritime Centre Vellamo. https://kohtalonaruotsinsalmi.fi/

Russian archipelago frigate Svjatoi Nikolai

CC0

As sketchfab does not allow you to untick the Attribution box when uploading this model is sorted as CC-BY.

Free to use in any capacity.

Will continue updates for more parts and variation and quality.

Make a basic hull, turret or vehicle body shape. Smash a load of parts on top and there you have it, military vehicle. Some parts would also work well for machinery or construction plant.

you may need to decimate the wheels if your duplicating them a lot as it can chug out blender if you have a old PC.

1.1 Updates
* added military style parts from breakers yard kits
* added smoke grenade discharger, sand board, tool/stowage bins
* tweaked camo texture

1.2 Updates
* added bar armour, 2 snorkels, wire steps, offroad winch and mounted weapon ring
* organised objects into collections

feel free to support me at:

https://www.buymeacoffee.com/Britdawgmstrfnk
or
https://ko-fi.com/britdawgmasterfunk

If you have any request for things that you would like me to add in just post in the comments.

Military Landvehicle Kit 1.2 (CC0)

This is a military firefly, designed with a thicker hull and larger engines. I designed it from the ground up to be bigger and louder than its predecessor, with my own unique forms.

Heavy Class Firefly

The Sierra Leone-flagged EDRO III ran aground off Pegeia on 8 December 2011 in heavy seas, during a voyage to Rhodes, from Limassol, Cyprus with a cargo of plasterboard. At the time of the accident, the ship had nine crew members - seven Albanians and two Egyptians. The crew were rescued and airlifted to the safety of Paphos by a local British Military helicopter.

The EDRO III weighs about 2,345 tons and is over 80 meters in length. According to Cyprus Marine Environment Protection Association CMEPA, the ship is empty of all cargo and fuel oil and rests on the sea rocks at an 11-12 degree angle. Embarking on the ship is no longer permitted as it is dangerous. Together with Germany's CIMEXTA Vessel Salvage Company, the task of safe removal of all diesel, hydrocarbons and marine pollutants onboard the vessel, and watertighting the hull was awarded to a Cypriot marine salvage company. This was completed in October 2013.

Shipwreck

It's a simply-made train cabin interior. free to use.
Although it doesnt have many polys, it was not made with low poly techniques, you could optimize it if you need.
It's designed to be seen only by the front. It's not hulled, but it's not modeled neither. 

All interior parts are detachable, you could rearrange it as needed.

Courtains are cloth sim, keyframed.

Modeled in blender, textured in Substance Painter.

Simple train cabin

THE INTRUDER XB982 FROM
VALERIAN AND THE CITY OF A THOUSAND PLANETS (2017)
WIDTH: 75 m
LENGTH: 72 m
HIGHT: 18 m

This is my version of hard surface modeling, NO UV mapping for the details. every hull plate, greeble, vent, scratch and dent are meticulously meshed to the surface. and i mean *into* the surface! this whole complicated thing is ONE SHELL. A hermetically sealed one piece 3d printable STL model. Normally this leads to stupidly high poly counts, how ever i managed to keep the thing down to a 12 meg, 251,968 polygon STL file.

This is a pretty darned accurate rendition of the CGI ship as seen in the movie, small liberties were taken in the name of the low poly Gods. the movie model obviously using huge UVs and surface detailing maps.

I made this thing as a public domain project, so unless the movie owners eventual try and copyright the design, not easy as the design is quite closely based on the 50 year old French comic series. she should be free for use.

XB982 ASTROSHIP DISPLAY MODEL

follow me on [Artsation](http://www.artstation.com/mohamedhussien1)

I really need your support to continue :)

hull spaceship

Hemmema (Hämeenmaa) Styrbjörn was one of the newest and strongest ships to take part in the war between Sweden and Russia 1788-1790. Launched in the spring of 1790 alongside its sister ships Hjalmar and Starkotter, it was the largest archipelago fleet frigate in Sweden and the flagship of the Swedish line in the second battle of Svensksund (Ruotsinsalmi). This ship type is very similar to ocean-going frigates and the Russian Aleksandr class in armament, size and rigging, allthough this ship in particular had larger 36-pounders on the main deck.

Hull dimensions:
•	Length at waterline: 43.3 m
•	Greatest width (breadth): 10.7 m
•	Greatest depth: 3 m

Ship 04, Swedish Hemmema frigate, closed sails, 15.5.2020, programs: 3ds Max, UE4.

This model was created in the Maritime Museum of Finland project "Historia eläväksi digitaalisella tarinankerronnalla" by Zoan Oy and is part of Smoke on the Waves experience at Maritime Centre Vellamo. https://kohtalonaruotsinsalmi.fi/

Swedish Hemmema Styrbjörn

![](https://bit.ly/3rRsqxS)
![](https://bit.ly/3jjIUts)

In May 2012, five sections of the hull of an armed Elizabethan merchantman were moved to Stoney Cove Dive Centre, some 400 years after it sank in the Thames Estuary. The site consists of a section of bow and 15m of the port side, as well as an anchor.

The ship is now part of a unique underwater museum display where it also serves to train the next generation of nautical archaeologists. 

Originally discovered in 2003 by the Port of London Authority, excavation was undertaken by Wessex Archaeology. The hull remains and associated artefacts, including iron bars, lead and tin ingots, pottery and leather were recovered together with 4 guns, one bearing the insignia 'TG' and the moulded emblem of a grasshopper, the mark of Sir Thomas Gresham (1519 - 1579). He was a financier and adviser to Queen Elizabeth.

Twelve tree-ring samples from the hull suggest that the timbers were felled in England after 1574. 

Photos: Martin Davies

The Gresham Ship - Stoney Cove, Feb 2013

King Gustav III of of Sweden took part in the archipelago fleet battles in 1789-1790 traveling with the fleet. He had two vessels, the larger schooner Amphion and a small yacht Amadis. This yacht was designed by F. H. Chapman. It is similar to other single mast relay and signal boats used by the Swedish archipelago fleet. King Gustav III was on board Amadis just behind the frigates at line of battle at the start of the battle. The Amadis had a single main mast with main, gallant and top, gavel behind and bowsprit and flysprit in bow.

Hull dimensions:
•	Length at waterline: 16.63 m (at keel 16.33 m)
•	Greatest width (breadth): 5.73 m
•	Greatest depth: 1.78 m

Ship 07, Swedish royal yacht Amadis, closed sails, 12.5.2020, programs: 3ds Max, UE4.

This model was created in the Maritime Museum of Finland project "Historia eläväksi digitaalisella tarinankerronnalla" by Zoan Oy and is part of Smoke on the Waves experience at Maritime Centre Vellamo. https://kohtalonaruotsinsalmi.fi/

Swedish royal yacht Amadis

Greek temple in Pötzleinsdorf Palace Park in Vienna's 18th district.
Around 1750, the estate belonged to Johann Josef Count Khevenhüller. In 1762, Fabius Ricci ran a cloth shearing business there, which is why it became known as the “Riccian estate”. After several changes of ownership, Johann Heinrich Geymüller acquired the castle in 1797, had it renovated, extended it to include a Meierhof and bought the Pötzleinsdorf estate in 1802.

Some buildings from this period have been preserved, including the temple, also known as Preindl-Salettl - named after Maria Preindl, Geymüller's mistress. Writer Salomon Mosenthal (1821-1877) used it as a place to work during his summer stays in Pötzleinsdorf. The palace and park were once an important center of cultural and social life.

**Many thanks to JuanG3D, who improved the geometry in many places.**

![](https://wien.denkmal-3d.at/SF/griechischer_tempel01.jpg)

Griechischer Tempel

The shipwreck of the famed Civil War ironclad USS *Monitor* is located 16 miles off Cape Hatteras, N.C., in 240 feet of water. The *Monitor* is known for its participation in the Battle of Hampton Roads in 1862 when the USS *Monitor* fought the CSS *Virginia* to a stalemate, neither ship able to penetrate the others armor. While the battle may have been a draw, it did signal the end of wooden warships and ushered in a new era of naval warfare with metal hulled ships and rotating gun turrets. The shipwreck of the USS *Monitor* was discovered in 1973, and in 1975 became the nation's first National Marine Sanctuary. 

Credit: NOAA/Monitor NMS

USS Monitor

Here's a npr-model I did mainly for a telegram stickerpack, but also to practice rigging. It's a stilized otter using a version of the good old inverted hull shading to get outlines.

[Get the Stickerpack on Telegram.](http://https://t.me/addstickers/otterly_adorable)

![A bunch of otters! An excited ott, an ott throwing a kiss, a cheeky ott, a sad ott, a swimming ott and an awkward ott.](https://preview.redd.it/tpk356x62uh61.png?width=1448&format=png&auto=webp&s=e2cf8da28452e16844dca285636fec37bf9d751f)

The rig has IK/FK switching, variable IK chain lengths, stretch-IK-switching, FK saling, powerful yet simple spine controls and an eye setup, that I kind of need to improove in the future ... if you want to have a crack at the model yourself, consider [forking it the model on gitlab](https://gitlab.com/betalars/otterly-adorable).

The materials are mainly built for quick prototyping in blender, it all kind of also works in realtime, but I'd put in a bit more optimisation before adding it to a game.

Otterly Adorable: rigging showcase

The team from the Museum's boatbuilding school have recently completed two skiffs as a joint project with Garnock Connections and Rathbone Training. 

Here you can have a closer look at the process behind the making of these skiffs. Their hulls are based on a traditional vessel: a Fair Isle Skiff, the model of which can be found in the  Scottish Fisheries Museum. It was constructed as a demonstration project in 2009 and started a true revival of the coastal rowing in Scotland. 

The original design of the skiff was modernised enabling anyone without a boatbuilding experience to take on a similar project with a bit of guidance from the experienced boatbuilders. Today people from all over the world build similar skiffs and regularly attend championships. 

Listen to Martin, the School Manager explaining how these vessels are made. 

To discover more about the boatbuilding workshop see: https://skfb.ly/6MyMF

Asset Library

About These Assets