This is a 3D animation ("Scallywag") of a juvenile green sea turtle (ID=CM1648) (*Chelonia mydas*) that was captured on December 23, 2016 by the Loggerhead MarineLife Center at Blowing Rocks Preserve.  The turtle was attacked by a shark, but survived.  It was photographed with the Beastcam technology with 20 Canon G16 cameras by Christine Shepard.

The 3D model was initially created through a photogrammetry scan using Capturing Reality.  Animator Jer Bot used Blender to reconstruct the full sea turtle from these scans, as well as animate the movements. Jeanette Wyneken from Florida Atlantic University, and Charles Mairne from the Loggerhead MarineLife Center provided feedback on the movements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 46A - Subadult Green Sea Turtle

Scene is part of the #medievalfantasyscene contest. Medieval castle with village is inspired by fortress of Ostrozac and Lukomir village, both located in Bosnia and Herzegovina. Scene with castle and village is placed high in mountains, where strong people used to harsh climate live and strong winds are blowing continuously through the mountains (you can actually hear wind if you turn volume up).

Medieval castle with village

Alligator Sp.

Alligators have no vocal chords but make noise by sucking air into their lungs and blowing it out in intermittent roars.

Accession number: 137.00

Alligator Skull

This work was exhibited in the Warsaw Society for the Encouragement of Fine Arts in 1907. The sculpted Hussar from the Jan Matejko House is identical to the original painted as a panneau by Leon Wyczółkowski. 

Artist Leon Wyczółkowski created a decorative panneau of *Knight among Flowers*, depicting a Hussar sitting on horseback and blowing the horn against the background of a flowery meadow. 

The Hussar on horseback dressed in armour with gilded wings and eagle feathers. The horse is covered with a red-and-gold shabrack (cavalry saddle), decorated with colourful glass imitating precious stones, and fitted with a decorative gold harness.

**For more images and further information, visit:** https://muzea.malopolska.pl/en/objects-list/5

Localisation of the physical object: National Museum in Kraków, Poland

**Digitalisation: Regional Digitalisation Lab, Małopolska Institute of Culture in Kraków, Poland; “Virtual Museums of Małopolska” Project**

Project Visualization (3D model + textures): Marcin Solarz

Hussar on horseback

Anthropomorphic whistle in the shape of a standing Maya warrior. The posture suggests a firm stance of authority or readiness for combat. He wears a loincloth with a decorated belt and an elaborate turban composed of elements evoking textiles, crowned by a feline mask or face at the top. The arms and shoulders are adorned with ribbons and ropes. Across the chest, he wears a necklace with plaques, followed by another necklace made of large rings from which a trophy head appears to hang. The head is suspended upside down, resembling a ceremonial pectoral, and from it hang four long fringed ribbons that may artistically represent the victim’s hair. The hollow structure of the piece and the blowing mouthpiece located on the back indicate its sound-producing function.

 IDAEH Cultural Property No.  16.2.5.0947
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Mayan warrior with trophy head pectoral

Polychrome (orange, red, and black) bowl with a slightly everted neck, globular body, and flat base, featuring relief-modeled facial traits including open eyes, an aquiline nose, a blowing open mouth, and prominent ears functioning as handles, both perforated. The face is decorated with vertical and horizontal red bands on the cheeks and sides of the face, as well as a horizontal row of black dots on each side of the mouth. The back of the vessel is painted with two vertical red lines and two black lines, along with two stepped designs in red outlined in black. NAA of the paste indicates the origin or manufacturing area as western Belize.

IDAEH Cultural Property No. 1.2.144.0894

www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 324

Anthropomorphic Effigy Bowl

Ocarina in the form of a standing figure wearing a headdress, round ear ornaments, and a banded necklace. It has two resonance chambers and four finger holes (two on the front and two on the back). The blowing mouthpiece is located on the head.

 IDAEH Cultural Property No. 16.2.5.0180
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Ocarina

Urn or incense burner lid in Teotihuacan style with an anthropomorphic handle. The lid is truncated-conical in shape, and surmounted by a male figure blowing what appears to be the base of a blowgun, which he holds with both hands. The right leg is bent beneath the left, which hangs forward. He wears a cap or helmet, round earspools, and a loincloth. Traces of red pigment are present. This style is frequently found in the Tiquisate or La Gomera area, Escuintla, and at other sites along the  Pacific Coast of Guatemala.

 IDAEH Cultural Property No. 1.2.179.0162
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 432

Incense Burner Lid w/ Figure w/ Blowgun

Polyglobular flute with three resonance chambers, representing a standing male figure, richly attired and appearing to be an elderly individual. The ocarina features a blowing mouthpiece at the top of the head and three tone holes. The figure wears a tall headdress with round appliqués, a banded necklace, tubular earspools, wristbands, and a textile belt knotted at the front. It is a direct-blown instrument.

 IDAEH Cultural Property No. 1.2.159.0097
 
www.fundacionrutamaya.org


Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 439

Anthropomorphic Polyglobular Flute

Anthropomorphic whistle, brown in color, with a headdress composed of five triangular projections decorated with incisions. The figure has open eyes, a prominent nose, an open mouth, and arms bent across the chest. The piece has four circular tone holes and a blowing mouthpiece with an air channel located on the head.

 IDAEH Cultural Property No.1.2.118.0201
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Anthropomorphic Whistle

Anthropomorphic whistle in the shape of a warrior wearing a grotesque mask. He wears a highly elaborate headdress with a diadem, a plaque, and long feathers, and carries a rectangular shield held with the left arm. He is adorned with jewelry and padded armor. The blowing mouthpiece is located on the back.

 IDAEH Cultural Property No. 16.2.5.0442
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

An elongated, dark orange ceramic ocarina with three resonating chambers. At one end is the head of a long-beaked bird, featuring protuberances on the crown. The direct-blowing mouthpiece is positioned at the top of the central chamber. Traces of blue pigment are still preserved on the surface.

 IDAEH Cultural Property No. 1.2.144.1444
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Poliglobular ocarina with Bird head

Anthropomorphic whistle in the form of the Maize God in a dancing pose, with the heel of the right foot slightly raised. The left hand rests on the hip, while the right arm is directed upward. He wears an elaborate headdress made of maize leaves and a loincloth with a belt decorated with beads. Among the surrounding foliage, a maize cob (mazorca) and a bird can be distinguished. Two additional small animals, a small deer (Odocoileus virginianus) and an opossum (Didelphis marsupialis), are positioned on either side of his legs. The blowing mouthpiece is located on the lower part of the piece.

 IDAEH Cultural Property No. 16.2.5.0182
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Whistle figurine

You can see it in action [here on Youtube](https://youtu.be/_FDZzKAFSz4),

and all the .stl files can be downloaded [here on the MakerWorld](https://makerworld.com/ru/models/1801690-balloon-powered-radial-engine#profileId-1921348). 

Can be powered by a balloon, or just by blowing air into it. Used in this [little toy car](https://skfb.ly/6LV6D).


![](https://i.imgur.com/JHsGiUt.jpg)
![](https://i.imgur.com/iaMC1VM.jpg)

Just a few of extra parts needed for the assembly:

* 3x nitrile glove fingers (blue part)
* 15x M3x8 bolts
* 2x M3x12 (or longer) bolts
* 17x M3 nuts

3d Printable Radial Pneumatic Engine

Kidney-shaped ocarina with two resonating chambers. The direct-blowing mouthpiece is located at the end of the left chamber, while the right chamber has two tone holes. The front of the piece is decorated with a modeled figure of a seated male character with crossed legs, a protruding belly, and scarification markings on his forehead. He wears a headband, beaded necklace, round ear ornaments, and a belt, all applied using the appliqué technique. Traces of blue paint remain on some areas of its surface.
 IDAEH Cultural Property No.  16.2.5.0958
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Kidney-shaped ocarina

Zoomorphic whistle made of brown-black ceramic, in the form of a bird. It features a small crest, wings on the sides (with finger-impressed decoration), a blowing mouthpiece at the tail, and three tonal holes on the chest.
 IDAEH Cultural Property No.  16.2.5.0037
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 288

Bird Whistle

Molded zoomorphic ocarina with hand-modeled details, representing a quadruped animal with an anthropomorphic head. The figure wears a headdress that appears to be a feline over a diadem decorated with incised vertical lines. As a musical instrument, it features three globular chambers and three tone holes; the blowing mouthpiece is located in the figure’s open mouth. According to Rodens et al. (2013, p. 146), this example is classified among polyglobular flutes.

 IDAEH Cultural Property No.1.2.144.0014
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Zoomorphic Ocarina

Ocarina modeled in the shape of a ring with a direct-blowing mouthpiece at the top and two tone holes. The ocarina is decorated with a medial molding around the rim and the torso of a figure, possibly the Maize God, modeled and attached over the center hole. The deity has an elongated head and arms flexed across its chest. It wears a three-banded headdress with feathers, round ear ornaments, a necklace of spherical beads, and wristbands. The tips of the feathers and the jewelry still retain the blue paint.
 IDAEH Cultural Property No.  16.2.5.0963
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 382

Ring-shaped Ocarina

(scrne 1: butch the gunman) 

Butch: FIRE!!

(shoots him)

Butch: YOU LOST!!

(scene 2: explosion)

a bomb.

(the bomb explodes)

(scene 3: lucky prescott)

Lucky: Hi there. My name is elisa lee prescott. or you can call me lucky for short. I make funny videos like smw projects and sometimes gameplays of hacks. My palms are pleading like this XD, And i have polished fingernails, which they are plain or light red. so that's all for now. bye.

Me: see ya.

Butch: FIRE!!

(shoots him but fail)

Butch: FOUL!!

(LUCKY PUTS FIREWORKS ON HIS FINGERS, BLOWING THEM UP)

Butch: ooouuuccchhh.....

(scene 4: loudness warning!)

Butch: you're right so that's why we are killing them. Lucky: WHAT NO! YOU CAN DO ANYTHING TO ME, BUT IF YOU LAY ONE FINGER ON MY FAMILY/FRIENDS I WILL-.

Lucky Prescott In Headphones Palms Touch Cheek

Zoomorphic ocarina, brown in color, representing a water bird with lateral wings, a crested head, round eyes formed by concentric grooves, and an oval body ending in a pointed tail. The piece has a handle located between the figure’s neck and body, four tone holes on the back, and a blowing mouthpiece at the tail.

 IDAEH Cultural Property No.1.2.118.0178
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Bird-shaped Ocarina

A double-chambered, zoomorphic whistle in the shape of a bird standing on its feet. It has two small wing-like protrusions; a round head with a tubular, grooved beak; two small, applied balls for eyes; and a small horizontal crest with a pinched edge. The blowing nozzle is located in the beak. Air passes from one chamber to the other, producing sound as the piece is moved from side to side while blowing. Its sound is similar to that of a bird that has been heard in the highlands of Sacatepéquez, Guatemala, but has not yet been identified.

 IDAEH Cultural Property No. 16.2.5.0508
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Double-chamber Whistle

Zoomorphic whistle depicting a crouching figure, with the legs spread to either side and the hands resting on the abdomen. The face resembles that of a monkey, wearing a helmet in the form of a bird’s head. The body is oval, with a longitudinal molding along the center, imitating the shape of a cacao pod or a gourd. Two short wings, or possibly foliage elements, emerge from behind the shoulders. The figure wears a necklace with vertical incisions. The blowing mouthpiece is located at the tail, and the tone holes are placed at the base of the nape. Possibly originating from the Alta Verapaz region. The object was made using a mold, with details finished by hand.

 IDAEH Cultural Property No. 1.2.144.1446
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Zoomorphic Whistle/Figurine

Zoomorphic whistle made using a mold and subsequently hand-finished, representing an owl. It features a blowing mouthpiece located in the tail and three tone holes. The surface shows burn marks produced during the firing process.

 IDAEH Cultural Property No.1.2.144.0244
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Zoomorphic Whistle in the Form of an Owl

Zoomorphic ocarina depicting a toad in a swimming posture. It features bulging eyes with modeled eyelids in relief and a closed mouth incorporating the blowing slit. The figure wears a necklace of square plaques, achieved through incised lines. A square decorative element with a central cross, along with volutes on the back, completes the ornamentation. Of particular interest is its double resonance chamber and double indirect mouthpiece with an air duct.

 IDAEH Cultural Property No. 1.2.144.1440
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

資源庫

關於這些資源