This Model is ready for 3D Printing without any needs for support structure. Tree support is part of its design. Just rotate it 180 degrees and place it on the printer's bed.

instagram: @freeradical666store

Website: https://freeradical666.com/

Soulless

simple modular dungeon

quickly prototype a map 

elements snap to grid of 1 meter and 45 degrees

halls and rooms shaped I, T ,L  and X

4k maps

Modular Dungeon

textures baked at 200 degrees for 4hours

[game ready mesh is available here... ](https://sketchfab.com/3d-models/crazy-ex-gf-game-mesh-fdecbc5840eb4d2da3a871fb49fed9bd)
![](https://i.ibb.co/hdJCdth/Creepy-Girl.jpg)

Whispers

A Railway stone curved bridge 4,5m wide, with 8 arched openings (10m span each) and a 116 m total span. The model is based on the  Manaris Railway Bridge, the bridge is located in the Prefecture of Arcadia in the Region of Peloponnese.
The horizontal circular arc, (the horizontal curve), is 40 degrees which means that it is part of an imaginary circle, with a radius of 166 meters.


**The model can also be used (in Blender 3d) as a straight bridge because the Simple Deform/Bend modifier has not been applied.**

Railway Stone Bridge

This is a 3D model of a replica of the leaning tower of Pisa! This famous torre illustrates the most popular and characteristic monument of Pisa and I got it as a souvenir, when I visited Italy. This 3D model is a project built within the course of “Digitization Technologies, Techniques and Applications”. Leaning Tower of Pisa, alternatively “Italian Torre Pendente di Pisa” is a medieval freestanding bell tower, of the cathedral of the Italian city of Pisa, famous for the settling of its foundations, which caused it to lean 5.5 degrees (about 15 feet [4.5 metres]) from the perpendicular in the late 20th century. Extensive work was subsequently done to straighten the tower, and its lean was ultimately reduced to less than 4.0 degrees. The tower is included in the Piazza del Duomo UNESCO World Heritage Site, which was declared in 1987. Today, it is one of the most touristic attractions in Italy and a great site to take creative pictures.
Source: https://www.britannica.com/topic/Leaning-Tower-of-Pisa

Leaning tower of Pisa

Greetings! This is a simulation of a V6 engine, with a cylinder bank angle of 90 degrees and a lower position of the camshaft.
This model includes a comprehensive set of internal components that accurately represent the technical features of an actual engine. However, it does contain simplifications and discrepancies from real-world physical processes, as this is a gaming resource for my project.
In addition, the model includes an additional set of textures, which you can view here: and get here: https://skfb.ly/pDzry
If you have a suggestion for cooperation: Telegram https://t.me/przheva.

V6 car engine with engine [MoreThem]

The globe has a round, Dutch-type base, equipped with a compass (the needle and the glass plate are missing) with the rose of the winds on the dial. The names of the directions are abbreviated, and north is marked with a fleur-de-lys. The globe’s horizon is made of wood and has an octagonal shape. It is supported by four legs turned in wood. The globe is 7–9 cm wide, with each side having the length of about 20 cm. Attached to the wood is a paper layer made of four parts. It depicts the azimuth, zodiac (degrees and symbols), as well as Julian and Gregorian calendars. All the elements are given Latin names. The cardinal and intermediate directions of the world are described in German.

Johann Gabriel Doppelmayr (1677–1750)

after 1744, Nuremberg

Jagiellonian University Museum Collegium Maius

Inventory number: 4120; 120/V

https://muzea.malopolska.pl/en/objects-list/2725

Celestial globe

Sailing ships were often bestowed with elaborate carvings and this wooden cat once adorned the famous 'Cutty Sark'. The ship was actually built in Dumbarton, on site currently occupying Scottish Maritime Museum building.

A cathead is a large wooden beam located on either bow of a sailing ship, and angled outward at rougly 45 degrees. The beam is used to support the ship’s anchor when weighing or lowering it. Many had a cat’s or lion’s head carved on the seaward beam end.

This little cat was a donation from the 'Cutty Sark' Trust and is the carved end of one of the ship’s original catheads. The beams were removed as part of restoration work, with the Museum receiving the donation in 1987.

Model created as a part of 'Scanning The Horizon' 3D digitisation project at the Scottish Maritime Museum.

Cat's head from the Cutty Sark

Owls are nocturnal birds of prey (order Strigiformes) known for silent flight, exceptional night vision, and the ability to rotate their heads up to 270 degrees. Found worldwide, they are characterized by forward-facing eyes, hooked beaks, and, in many species, asymmetrical ears for locating prey. A group of owls is called a parliament.

Winged Sentinel

The **E-75 “*Standardpanzer*”** was intended to replace the Tiger II tank. For ease of manufacture, the vehicle was to be built on the same production lines as its predecessor, and share as many components as possible.

On paper, the E-75’s upper front plate was angled at **60 degrees** (compared to 55 for the Tiger II) Drafts showed that the upper front plate was meant to be **150mm** for the E-75, increasing the effective thickness to around **300mm**. Statistics of the turret was vague however, some proposed that the E-75 uses an enlarged Tiger II Krupp turret, others believed it was a completely new design.

**Sadly, not a single E-75 sample was ever built.**

The **E-75 BLM (*Besondere Leistung Modernisiert*)** is the main battle tank variant of the original E-75 in **an alternative timeline**. It features **explosive reactive armour (ERA)**, **modular composite armour** on the turret and a **thermal sight** for the gunner.

E-75 BLM

Mosaic Guppy Male. Known for its vibrant colors and intricate patterns, the Mosaic Guppy is a delight to observe and care for. They can handle temperatures as low as cold water and as warm as 30 degrees Celsius

Mosaic Guppy Male

What if the YT-2400 had the front end of the YT-1300?  This would give the smaller freighter the cargo loading and hauling capabilities of the larger YT-1300.  That's what this design is.  

features a dorsal and ventral canon that can rotate 360 degrees along the Z axis.  

Free to use in any of your Star Wars productions as long as you credit me.

**Greeblies provided by the Sci-Fi Kit Bash and Props Pack

Link your projects in the comments below!

YT-1850

The E-75 "Standardpanzer" was intended to replace the Tiger II tank. For ease of manufacture, the vehicle was to be built on the same production lines as its predecessor, and share as many components as possible.

On paper, the E-75's upper front plate was angled at 60 degrees (compared to 55 for the Tiger II) Drafts showed that the upper front plate was meant to be 150mm for the E-75, increasing the effective thickness to around 300mm. Statistics of the turret was vague however, some proposed that the E-75 uses an enlarged Tiger II Krupp turret, others believed it was a completely new design.

Sadly, not a single E-75 sample was ever built.

The E-75 BLM (Besondere Leistung Modernisiert) is the main battle tank variant of the original E-75 in an alternative timeline. It features explosive reactive armour (ERA), modular composite armour on the turret and a thermal sight for the gunner.

A simple sculpture of Mini Malina sprite from Helltaker, without shaders or textures, just the model for printing. 

A friend of mine printed it today and it went very well. 

I recommend separating or editing the 3 parts (Malina, tail, and base) in different locations in the printer settings, or printing each part separately. 

I also recommend positioning Malina at -45 degrees on the X-axis and changing the scale in Blender.

Helltaker - Mini Malina - stl

This model is a mechanical spinner assembly designed using Autodesk Inventor.

The assembly demonstrates rotational motion using a central deep groove ball bearing. The inner ring is fixed while the outer ring is constrained to the spinner body, allowing realistic rotational degrees of freedom.

This project was created to practice assembly constraints, grounding, and motion simulation in Inventor.

Software Used: Autodesk Inventor
File Format: glTF (.glb)

Designed as part of mechanical CAD learning and motion analysis practice.

Fidget Spinner Assembly with Ball Bearing

100mm Pipe Curve

For proper use, we recommend downloading the Original format.The Converted version is intended for web viewing only. In the Original format, the following are fully preserved:✔ native scene structure✔ all materials without simplification✔ accurate texture maps✔ original object namesIf you are going to integrate the model into a project, choose the Original format.A screw pipe bend 90 degrees with inner and outer thread. A brass material and slighty rusty edge wear with small scratches.

Screw Pipe Angle Bend

For complete workflow compatibility, we recommend downloading the source format.The Converted version is intended only for use in the web viewer. In the source file, the following are fully preserved:✔ native scene structure✔ complete materials without reduction✔ accurate texture maps✔ proper object namingIf you plan to use this model in production, choose the original version.decorative wooden interior storage porch. The front bars regulate the opening the origin point of the bars is set at the bottom rotated 10.5 degrees along X axis.

Interior Storage Porch Rack

For complete workflow compatibility, we recommend downloading the source format.The viewer version is intended exclusively for browser preview. In the source file, the following are fully preserved:✔ native scene structure✔ unsimplified materials✔ proper texture maps✔ proper object namingIf you plan to use this model in production, choose the source file.A large crane used in construction and industrial parks. It s circular base track allows the crane to swivel 360 degrees and it s impressive height allows it to move massive constructs.

Ring Crane

**Can't be used in any commercial work, only for personal use!**

The General Dynamics F-16 Fighting Falcon is an American single-engine supersonic multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF)

The Fighting Falcon's key features include a frameless bubble canopy for enhanced cockpit visibility, an ejection seat reclined 30 degrees from vertical to reduce the effect of g-forces on the pilot, and the first use of a relaxed static stability/fly-by-wire flight control system that helps to make it an agile aircraft.

As of 2015, The F-16 was the world's most numerous fixed-wing aircraft in military service.

**Render:**
![](https://cdnb.artstation.com/p/assets/images/images/079/177/083/large/bohmerang-finalbetter.jpg?1724183948)

Asset Library

About These Assets