This is a 3D animation of a Southern Right Whale (Eubalaena australis, Panel C, Fig. 1) which was reconstructed using the open source software Blender 3D (blender.org). Measurements taken from drone videos of right whales (see Christensen et al. 2019) were used to create an ellipsoid that served as a basis for the model. The measurements for height and width of the whale were taken at increments of 5% of the total body length. Reference photos were also used as a guide to create taxonomic features onto the ellipsoid using Blender 3D sculpting tools (primarily the dynamic topology function). These features included the fluke, pectoral fins, eye, and mouth arrangements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 55A - Southern Right Whale

low-poly ancient egyptian jewelry for game and other uses. Pectoral Scarab of King.

The Scarab Pectoral was found in Tutankhamun's tomb along with hundreds of other pieces of jewellery. He probably wore it during his lifetime, hung from a gold chain around his neck. It shows a scarab beetle with a sun on top and a bowl on the bottom, and a pair of bird's wings.

Ancient Egyptian Jewelry

Anthropomorphic whistle in the shape of a standing Maya warrior. The posture suggests a firm stance of authority or readiness for combat. He wears a loincloth with a decorated belt and an elaborate turban composed of elements evoking textiles, crowned by a feline mask or face at the top. The arms and shoulders are adorned with ribbons and ropes. Across the chest, he wears a necklace with plaques, followed by another necklace made of large rings from which a trophy head appears to hang. The head is suspended upside down, resembling a ceremonial pectoral, and from it hang four long fringed ribbons that may artistically represent the victim’s hair. The hollow structure of the piece and the blowing mouthpiece located on the back indicate its sound-producing function.

 IDAEH Cultural Property No.  16.2.5.0947
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Mayan warrior with trophy head pectoral

Anthropomorphic pectoral with prominent arched eyebrows, open eyes, a flat nose, and an open mouth with pronounced lips. Traces of hematite remain on the surface.

 IDAEH Cultural Property No. 1.2.144.1297
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Anthropomorphic Pectoral

Effigy vessel with lid in the form of a elderly figure. The vessel corresponds to the waist and lower limbs, and the lid forms the upper part of the body. The figure appears to carry on its back an effigy vessel with a human figure, possibly intended as a container for beverage. The figure’s face shows wrinkles, a slightly open mouth revealing few teeth, and a short beard. The arms are slightly flexed and directed forward, as if holding an object with the hands, which have perforations that may have served this purpose. The figure wears a diadem with what appears to be a fan of feathers; flower-shaped earspools; a necklace of beads and a shell pectoral; and a maxtlatl, whose cloth falls down the front to the feet and is decorated with a trophy head.

 IDAEH Cultural Property No. 1.2.179.0195
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo"

Effigy Vessel

This model was generated using Meshy, an AI-powered 3D creation toolkit. Meshy helps creators turn ideas into high-quality 3D models with ease. View the original model and claim a free month of Pro on Meshy: [https://www.meshy.ai/s/T4jmJE](https://www.meshy.ai/s/T4jmJE)

Pectoral with Coins and Pseudo-Medallion (Egypt)

Oval shell pectoral ornament featuring a central cutout and two perforations along the upper edge, likely used for suspension.

IDAEH Cultural Property No.1.2.144.0887

www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 232

Pectoral

Anthropomorphic whistle in the form of a standing dwarf with his left hand on his waist and his right arm, fractured,  extended to the side. He wears a feather headdress, a diadem decorated with discs and fringes, a hip cloth, round earflares, and an oval pectoral made of cut shell. This whistle figurine was made with a mold with details made by hand.

 IDAEH Cultural Property No. 1.2.144.1405
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Dwarf with headdress and pectoral

Zoomorphic pectoral made of orange-colored shell, in the form of a crocodile or lizard with jade inlays set in the eyes. The body details are rendered through incised lines and grooves; three additional perforations intended for inlays are present but now missing. On the dorsal surface, the carved figure of another animal, possibly a jaguar, is depicted, with its features defined by incised detailing. The eyes are open and fitted with green jade inlays, and the bodily features are articulated through incision.

 IDAEH Cultural Property No. 1.2.159.0164
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 302

Pectoral in the form a Crocodile or Lizard

Anthropomorphic mosaic mask with jade pieces for the face; Spondylus princeps shell and coral for the lips; and eyes inlaid with shell and obsidian. Its size suggests it may have been a royal belt ornament or a pectoral. The Maya were masters in the creation and manufacture of masks from various materials, especially jade. The smaller ones, like this one, were usually mounted on wood and could have been used as large pectorals and ornaments for royal belts.
 IDAEH Cultural Property No.  16.2.5.1161
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 288

Mask with mosaics of jade, shell and obsidian

Teotihuacan style incense burner featuring a central anthropomorphic face with red-painted skin, wide slanted eyes, oversized earspools and a banded necklace with pectoral. A key feature is the removable butterfly-shaped nose ornament. On each side, the figure holds pom-poms or ceremonial standards with floral crowns. The upper headdress is decorated with green feathers and stylized butterfly elements, followed by a band of five flower corollas and applied beads. The lower mantle shows horizontal red, white, and green bands. The biconical base bears a frontal bow (possibly a stylized butterfly) two flower-like discs, and side flaps with applied rings. 

 IDAEH Cultural Property No.1.2.1.0337
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

Incense burner with removable nose ornament

Zoo-anthropomorphic whistle in the form of an elderly figure emerging from a shell, possibly representing God N or a Pahuahtún. The face of the aged individual is clearly defined, with pronounced wrinkles and a semi-open mouth; the hands project outward over the edge of the shell. The figure wears a textile band and jewelry (two round earspools and a necklace with a pectoral) accented with blue details.

 IDAEH Cultural Property No. 1.2.144.1423
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Elderly Figure Emerging from a Shell

A male figurine in the form of an achondroplastic dwarf seated with his legs crossed in front of him. He wears a headdress or hat shaped like a long-beaked bird, circular ear ornaments, and a necklace with a pectoral made of shell cut into a triangular shape. His clothing consists of a loincloth with a plain belt ending in a flat, quadrangular design. His right hand rests on his stomach, while his left hand rests on his left leg.

 IDAEH Cultural Property No. 1.2.179.0002
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Dwarf with Bird headdress

Urn with an everted rim, straight diverging walls, a slightly concave base, and a pedestal support. The principal decoration consists of a three-dimensional figure on the front, with open eyes and mouth, an aquiline nose, outstretched arms, a rectangular blue pectoral, earspools, and a loincloth. The figure appears to be carrying the urn on its back. The urn has two vertical handles decorated with horizontal black lines and blue bands. The pedestal is decorated with vertical black lines and blue bands on the front.
 IDAEH Cultural Property No.1.2.144.0178
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

Urn with Male Character

Whistle depicting a smiling male figure with a cheerful expression. In his right hand he holds a rattle (chinchín), suggesting that he may represent a musician. He wears long hair adorned with a cloth diadem, pendant ear ornaments (possibly feathers), and a necklace with a horizontal pectoral tied at the front. The skirt he wears features multiple horizontal folds with knots at the front. The piece appears to represent an act of self-sacrifice, as a knife or blade pierces the male member. Mold-made with hand-finished details, with red paint applied to the body and blue to the jewelry and garments.

 IDAEH Cultural Property No.  1.2.144.1432
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider"

Whistle Figurine

Anthropomorphic whistle in the shape of a dwarf featured in an upright position, with legs slightly apart and hands resting on the hips. A prominently protruding abdomen is emphasized. The figure wears an animal mask, a necklace with a pectoral element, circular earspools, a loincloth, and a conical textile headdress tied at the back.

 IDAEH Cultural Property No. 16.2.5.0460
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Pectoral worked in jade or green stone, slightly oval-shaped with grooved decoration featuring two anthropomorphic faces, one in the center and the other on the right end. The face in the center is seen from the front and has geometric features, with open eyes, a rectangular nose, and an open mouth with prominent lips. The face on the end is in left profile and has an open mouth, a tall headdress, and rectangular ear ornaments. The upper and lower edges feature horizontal and vertical grooves.

IDAEH Cultural Property No. 1.2.159.0104

www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 254

Pectoral with faces in relief

Zoomorphic pectoral with the effigy of a feline head (probably jaguar) seen from the right profile, with the jaws open showing its fangs. The piece is a bivalve shell worked with cutting, incision and drilling techniques. The details of the jaw and ear are incised, with the eye pierced. Two suspension holes below the upper edge.
 IDAEH Cultural Property No. 1.2.144.0511
www.fundacionrutamaya.org


Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 250

Pectoral with Jaguar effigy

Polychrome anthropomorphic whistle (red, white, and blue)  in the shape of a standing dwarf figure with legs apart and arms slightly bent across the abdomen, holding what appear to be two fringed bags. He wears a cloth cap-like headdress, round earspools, a necklace with a cylindrical pectoral (painted white), and a red maxtlatl loincloth. The face is painted red and the body yellow. From the Northern Alta Verapaz region and southern Petén.

 IDAEH Cultural Property No.  16.2.5.1019
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider

Whistle figurine (Dwarf)

Anthropomorphic pectoral carved from a marble-like stone, representing a human face with thick eyelids and lips, and a prominent nose.

 IDAEH Cultural Property No. 1.2.144.0851
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Space Spider"

Incense burner with “theater-type” lid, of Teotihuacan-inspired tradition. The lid features a standing figure wearing an ornate headdress embellished with floral appliqués, butterflies, circular elements, and pendant fringes in yellow and green pigments. Crowning the headdress is a supernatural butterfly visage with prominent fangs, an iconographic motif closely associated with warfare in Mesoamerica. The figure bears an oversized nose ornament and holds circular disks with attached fringes, while his garment rendered as a feathered costume, it includes a pectoral medallion across the chest. The pedestal base displays a frontal talud-tablero motif and vertical lateral flanges."

 IDAEH Cultural Property No.1.2.1.0335
 
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

Incense burner with butterfly headdress

Polychrome plate (red, black, and white on dark orange) with tubular supports containing rattles. The interior surface is decorated with a red band along the rim, followed by a band featuring two stylized zoomorphs (a jaguar and a possible reptile) extending across the entire inner wall. At the center, a scene portrays two figures seated on a throne painted black with red and white circles, engaged in a conversational posture.  The principal figure, is seated and shown in left profile, wearing a headdress, earspools, necklace, and pectoral, with a loincloth decorated with jaguar-skin motifs. The secondary figure is kneeling in an attitude of reverence. The surface retains areas of repainting.
 IDAEH Cultural Property No.1.2.144.0073
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 242

Plate w/ Figures and Zoomorphic Motifs

Urn with slightly concave walls, a pedestal base, and two lateral tabs. The vessel has an everted rim with pinched edging, painted white. At the center of the vessel wall is a relief representation of the Old God (Pahuahtún), wearing a headband and a snail positioned atop the head, with round earspools and a beaded necklace with pectoral. The deity features open eyes, expression lines, and wrinkles achieved through incision, and an open mouth showing a single tooth on the left side. The image is framed by two bands decorated with depressions. Place of provenance: Guatemalan Highlands, Quiché region.
 IDAEH Cultural Property No. 1.2.144.1600
www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made using Artec Leo

Urn with Old God (Pahuahtún)

Pectoral worked in greenstone, with a polished surface and a slight triangular shape. The relief decoration shows the image of a male figure (noble or deity) in right profile with open eyes, aquiline nose, open mouth, left arm flexed over the chest, and right arm raised. The figure wears a feather headdress, round ear ornaments, a necklace with spherical beads, and a hip cloth with a belt. The pectoral has a longitudinal biconical hole, while on the sides there are seven biconical holes and two round holes.
 
IDAEH Cultural Property No. 1.2.159.0100

www.fundacionrutamaya.org

Special thanks to the staff of La Ruta Maya Foundation for their hard work on this project.

3D model made in RealityScan; Total # of images: 228

資源庫

關於這些資源