## Scanning
The scan took place in two steps: First the top of the lawn mower and then the bottom. For both scans I didn't use any scan spray or similar, just took the scanner and started scanning at 1mm resolution. Since then markerless laser scanning made quite some progress, especially in wired mode where scan speed was increased from 20 FPS to 60 FPS with the latest update. Hopefully this will also transfer to wireless mode in the future. 

## Post-Processing
Processing just consisted of generating the point cloud when finishing the single scans, aligning the scans to each other (I used manual feature alignment since the overlap was quite minimal) and then I meshed the scan with default settings. Only divergence from default was using the semi watertight setting since it delivers a more closed model without too much "artistic freedom" to close holes. The scan was then reduced and aligned in Quicksurface.

Lawnmower - Einstar Rockit (markerless laser)

High-quality 3D model of minimalist wireless
headphones created with AI-assisted workflow
in Meshy and refined in Blender.

— High poly mesh
— PBR materials and 8K textures
— Game-ready asset
— Formats: GLB, OBJ, FBX

Perfect for web 3D experiences, product
visualization, e-commerce, and interactive
websites using Three.js or Spline.

Minimalist wireless headphones

For complete workflow compatibility, we recommend downloading the source format.The viewer version is intended only for use in the web viewer. In the Original format, the following are fully preserved:✔ full scene structure✔ unsimplified materials✔ proper texture maps✔ correct object namesIf you intend to use the asset in a production environment, choose the Original format.This 3D model depicts a young woman standing leaning back on something with her backside. Her legs are crossed and her hands are in the pockets of her jacket. She is dressed in blue jeans a beanie and a plum quilted jacket. White wireless earphones are in her ears. She gazes slightly to the side as if watching someone or something with casual interest.

Street Sentinel

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (~80FPS over WiFi).  
For the laser scan marker tracking was used. The scan bench was placed on a turntable with marker geometries placed around it to allow scanning from shallower angles (as seen in last picture). The resolution was set to 0.1mm and exposure was adjusted so the white print wasn't overexposed. For laser mode I used a combination of cross, parallel and single line mode, changing them can be done by double pressing the scan start button on the scanner.   

## Post-Processing
For both scans processing was done using the recommended settings within CrealityScan. This is basically only Fusion since it already generates a mesh at this step which can directly be exported.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other.

Scan Bench - Creality Sermoon P1 Laser

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (with latest update laser mode now reaches 120FPS over WiFi, not bad at all).  
For the laser scan marker tracking was used. The scan bench was placed on a turntable with marker geometries placed around it to allow scanning from shallower angles (as seen in last picture). The resolution was set to 0.1mm and exposure was adjusted so the white print wasn't overexposed. For laser mode I used a combination of parallel and cross line laser mode, changing them by using the scanners touch screen while scanning.   

## Post-Processing
For all three scans precessing was done using the recommended settings within ExScan Rigil. This includes point cloud generation and meshing.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other. The laser scans had to be reduced to allow upload to Sketchfab.

Scan Bench - Einscan Rigil Laser

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (with latest update laser mode now reaches 120FPS over WiFi, not bad at all).  
For IR mode I chose large mode at 0.5mm resolution and marker tracking as well as small mode at 0.2mm resolution with marker tracking. Normally I don't use small mode much since I mainly use markerless laser scanning for parts where I would use it normally. My sweet spot for IR mode is somewhere between 0.5mm and 3mm.

## Post-Processing
For all three scans precessing was done using the recommended settings within ExScan Rigil. This includes point cloud generation and meshing.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other. The laser scans had to be reduced to allow upload to Sketchfab (just under 4M triangles will result in a 100MB ply when exporting from Quicksurface).

Scan Bench - Einscan Rigil IR Large

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (with latest update laser mode now reaches 120FPS over WiFi, not bad at all).  
For IR mode I chose large mode at 0.5mm resolution and marker tracking as well as small mode at 0.2mm resolution with marker tracking. Normally I don't use small mode much since I mainly use markerless laser scanning for parts where I would use it normally. My sweet spot for IR mode is somewhere between 0.5mm and 3mm.

## Post-Processing
For all three scans precessing was done using the recommended settings within ExScan Rigil. This includes point cloud generation and meshing.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other.

Scan Bench - Einscan Rigil IR Small

## Scanning
The scans were captured with wireless connection to my workstation to capture the data faster (~80FPS over WiFi).  
IR mode had to be done in feature tracking since marker tracking is not yet supported by the software. For this I used the normal size which provides better tracking and is the mode I use most often when using IR mode (same mode was selected with the Rigil in IR mode).

## Post-Processing
For both scans processing was done using the recommended settings within CrealityScan. This is basically only Fusion since it already generates a mesh at this step which can directly be exported.  
After exporting the meshes I used Quicksurface to align the meshes to the coordinate system and each other. The laser scans had to be reduced to allow upload to Sketchfab (just under 4M triangles will result in a 100MB ply when exporting from Quicksurface).

Scan Bench - Creality Sermoon P1 IR Normal

High-quality 3D model of the Sony WH-CH720N Wireless Noise Cancelling Headphones.

blender file here : https://drive.google.com/file/d/1HIjRBgCxh2wT27Z7hCfgUbLSoTlngbiq/view?usp=sharing

This model is carefully recreated with accurate proportions and details to match the real product design. The headphones feature a lightweight over-ear design, soft ear cushions, and a minimal modern look.

The model is optimized for visualization, product rendering, and advertising purposes. Suitable for product showcases, animations, AR/VR scenes, and commercial presentations.

Created in Blender.

Features:
• Clean topology
• Realistic materials
• Accurate scale
• Optimized geometry
• Ready for rendering and animation

Sony WH-CH720N Headphone 3D Model By Sagar modi

For full functionality, we recommend downloading the source format.The viewer version is intended only for use in the web viewer. In the original file, the following are fully preserved:✔ native scene structure✔ complete materials without reduction✔ correct PBR texture maps✔ proper object namingIf you are going to integrate the model into a project, download the original version.ATTENTION You can buy a higher quality model 4k textures and better geometry . To do this write in a comment under the model or directly to me on Discord sherhn. You can also order models from me. Magic Keyboard with Touch ID delivers a remarkably comfortable and precise typing experience. It s also wireless and rechargeable with an incredibly long lasting internal battery that will power your keyboard for about a month or more between charges. It pairs automatically with your Mac so you can get to work right away.

Apple Magic Keyboard Short Black

This 3D GLB model showcases a compact, multi-functional smart signal pole, ideal for smart city and telecom visualization projects.
Built around a tall, white cylindrical pole with a square base, it integrates core communication and urban service features:
Telecom Antennas: Two vertical antenna arrays on the upper section support 4G/5G and wireless data transmission.
Lighting System: Three curved arms with pink-tipped LED lights and a top-mounted accent light provide aesthetic street illumination.
Smart Sensors: A surveillance camera for public safety monitoring, plus a smaller lower-mounted device (likely an environmental sensor or Wi-Fi access point), extend its smart city functionality.
With its clean, modular design and precise component details, this model is a practical asset for 3D renderings, urban planning simulations, and infrastructure demonstrations.

signal tower

For complete workflow compatibility, we recommend downloading the Original format.The Converted version is intended for web viewing only. In the original file, the following are fully preserved:✔ original scene hierarchy✔ complete materials without reduction✔ proper texture maps✔ proper object namingIf you are going to integrate the model into a project, download the source file.E700 Wireless Bluetooth Headphones are placed on a desktop stand with a sleek aluminum base.

E700 Wireless Bluetooth Headphones

For complete workflow compatibility, we recommend downloading the original file.The viewer version is intended exclusively for browser preview. In the Original format, the following are fully preserved:✔ full scene structure✔ all materials without simplification✔ proper texture maps✔ correct object namesIf you intend to use the asset in a production environment, choose the source file.Blender 3d

Wireless Keyboard

A modern desk lamp modeled in Blender as part of a daily practice routine. The design features a curved neck, angled shade, and glowing emission bulb to simulate a contemporary wireless lamp style. Created to strengthen fundamentals in modeling, materials, and lighting.

Cordless Desk Lamp

For proper use, we recommend downloading the Original format.The viewer version is intended exclusively for browser preview. In the source file, the following are fully preserved:✔ full scene structure✔ complete materials without reduction✔ proper texture maps✔ proper object namingIf you intend to use the asset in a production environment, choose the original version.Wireless Headphone

Headphone

## Scanning
I simply chose IR mode with the large setting, automatic exposure and geometry tracking. One setting that initially confused me was the base removal. It is turned on by default and therefore the floor wasn't scanned at all, after disabling the floor is also captured. Additionally when changing scan settings in the UI you must press "Apply" for the changes to come in effect. After starting scanning I just slowly moved around the sofa always using the folds and creases of the pillows as geometry to track. The IR performance really reminds me of the Sermoon S1 (P1 in standalone reaches somewhere between 10 to 15FPS, 30 FPS connected to a PC (wired and wireless) as the S1 does). Hopefully the IR mode can still be made faster in standalone mode but I guess this is always the case for every scanner and every mode (laser scanning already reaches 60 FPS). The whole scan took maybe 4 to 5 min.

CouchSofa (IR scan) - Creality Sermoon P1

Prop for animation and game dev. Has a turn on switch that is separated from the rest of the body, so you can move it and animate it.

Wireless Microphone

Wireless headphones Nothing CMF BUDS 2 PRO. 3D model of wireless headphones in minimalist style, inspired by the iconic CMF by Nothing. The model is modeled from my own headphones, maybe they turned out to be too dirty, but it's even more interesting this way. I made a model in real dimensions.
I've improved my previous model: https://skfb.ly/pBRIJ .
Here is the original model without animation: https://disk.yandex.ru/d/SSMm9b0q5VHpjg .

Nothing BUDS 2 PRO

A photorealistic 3D recreation of the SDRD SD-307 wireless karaoke speaker system.

This asset features the main speaker unit with its signature "owl-eye" design and two docked wireless microphones. Great for use as a background prop in interior scenes, visualizations, or realistic game environments.

Materials: Fully PBR (Plastic, Metal Mesh, LED Display)

Textures: High-resolution [4k] maps included.

SDRD Karaoke Machine (PBR / Game Ready)

Basic Wireless Microphone with Stand

The best headphones i ever had! So i decided to make them in 3D :)                                 
**Free to download!** 4K textures.                                                                                   
Made in Blender and Substance Painter.

資源庫

關於這些資源