This is a 3D animation of a Southern Right Whale (Eubalaena australis, Panel C, Fig. 1) which was reconstructed using the open source software Blender 3D (blender.org). Measurements taken from drone videos of right whales (see Christensen et al. 2019) were used to create an ellipsoid that served as a basis for the model. The measurements for height and width of the whale were taken at increments of 5% of the total body length. Reference photos were also used as a guide to create taxonomic features onto the ellipsoid using Blender 3D sculpting tools (primarily the dynamic topology function). These features included the fluke, pectoral fins, eye, and mouth arrangements.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 55A - Southern Right Whale

CGTrader: StormierTunic16

Realistic man 3D model created with Blender. High detail and Realistic Model with UVs and clean Topology.

Textures: 4K textures Diffuse, Specular, Normal, Roughness

Formats: Blend

Unit of measurement used for the model: m

James  realistic male character 3D model

This is an animation of a juvenile (straight minimum carapace length = 27.5 cm, mass = 3.0 kg) green sea turtle (Chelonia mydas) that was reconstructed from photos and measurements from a live individual. The turtle was collected by Inwater Research Group during an in-water assessment to gain valuable insights into the demographics of this threatened species.  The turtle was in good health and released back into the wild.  A CG artist (Johnson Martin) reconstructed the turtle using Blender software.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 72B - Juvenile Green Sea Turtle

This is an animation of a juvenile (straight minimum carapace length = 75.1 mm, mass = 72.8 g, age=20 days) Leatherback sea turtle (Dermochelys coriacea) that was reconstructed from photos and measurements from a live individual. The turtle was collected by Jeanette Wyneken (Florida Atlantic University) for her research on leatherback ecology and development, and the model was created in collaboration with the Upwell Non-Profit (https://www.upwell.org/).  CG artist Johnson Martin reconstructed the turtle using Blender software.

Downloads are freely available for creative and non-profit use. To inquire about licensing, please visit **www.digitallife3d.org**.

Model 74A - Juvenile Leatherback Sea Turtle

Modelled in Blender in 2 weeks from scratch and based of real measurements and reference picture.

Accurate depiction of an M1A2 SEPv2 tank with ERA armor upgrade kit.

High poly but to be used in a UE4 game.

Still need to texture

Blender M1A2 SEPv2 Tank model

The 3D model presents a historical mannequin (a dress form) dating to 1900s. The virtual mannequin was generated automatically by using a new method of parametric modelling (for further details see https://doi.org/10.1108/IJCST-06-2019-0093). The values of body measurements were taken from a sizing table. The measurements are: bust – 81.4 cm; waist – 51.4 cm; hip – 92.4 cm. A video presentation of the 3D model is available at https://youtube.com/playlist?list=PLCTQCzEpoeLvTramFMrmp93PEDaIVTLKR&feature=shared 

The authors of the 3D model are

Aleksei Moskvin https://independent.academia.edu/AlekseiMoskvin

Mariia Moskvina https://independent.academia.edu/MariiaMoskvina

(Saint Petersburg State University of Industrial Technologies and Design)

The authors thank scientists from Ivanovo State Polytechnic University for providing information on historical mannequins.

Mannequin (1900s): M size

I have had to use a lot of artisit licence with this model as high quality photographs are hard to come by.  I do not use schematic diagrams for my models and only use photographs I can find on google images.  With some basic measurements found on wikipedia, I am ususally able to get a close approximation.  

Updated to include rigged doors

**** Not Presented as Game Ready ****

Modelled in Blender 3.1

![](https://db3pap002files.storage.live.com/y4mEMSN8Varae-CUm21RNSWABisINEWQWZ4vx9jEmpD3ADRCdqYMTgA4z-fYAz2TrZw9nHTyx96SHMzS6-4Dao9wZDXxSJ5tagfN4m2AJ-WdX69MB8XMZK79u9Qpt6VXHWUArIbLEKCUAuefEZ6H2Loq7_c2yu0NGyWzo5_YSgyiwZGZlhGr66ldM5JCyP4jLcS?width=3840&height=2160&cropmode=none)

1959 Tube Driver Car - London Underground

In this 3D solar system size comparison model, the radius of each planet is measured relative to Earth's radius (6,378 km). This means that the Earth's sphere in the model has a radius of 1 cm, where 1 cm represents 6,378 km. For example, the sphere representing Jupiter has a radius of 10.961 cm, and its actual radius can be calculated using the formula:

Sphere Radius* 6,378 = Actual Radius of the Planet

The data used in this model was sourced from Google. While the model provides a useful size comparison, it is not 100% accurate because planets have different radii at the poles and the equator. However, it still serves as a good reference for understanding relative sizes.

The Sun’s radius can also be calculated using the same formula. However, the Sun does not have a single, fixed radius, as different wavelengths of light reveal slightly different measurements. In this 3D model, the Sun’s radius was determined based on visible light observations.

I hope you like this model!

Solar System Size Comparison

Scientific name: Giraffa
Height: Northern giraffe: 4.6 – 6.1 m
Eats: Acacia
Mass: Northern giraffe: 550 – 1,200 kg
Daily sleep: 4.6 hours (In captivity)
Gestation period: Northern giraffe: 15 months

The giraffe is an African artiodactyl mammal, the tallest living terrestrial animal and the largest ruminant. It is traditionally considered to be one species, Giraffa camelopardalis, with nine subspecies. However, the existence of up to nine extant giraffe species has been described, based upon research into the mitochondrial and nuclear DNA, as well as morphological measurements of Giraffa. Seven other prehistoric species, known from fossils, are extinct.

The giraffe has intrigued various cultures, both ancient and modern, for its peculiar appearance, and has often been featured in paintings, books, and cartoons. It is classified by the International Union for Conservation of Nature as vulnerable to extinction, and has been extirpated from many parts of its former range.

Source : Wikipeidia

Thanks To Blender

Giraffe

* **Object Metadata:**
* Title: Tellurium with Lunarium 
* Inventory number: KGS_001-x, http://doi.org/10.21264/ethz-a-000005721
* Date: ca. 1885-1900
* Dimensions: Support stand 38,5 cm, Stand base diameter 17 cm, Propeller incl. globe 62,5 cm, Globe diameter 45,5 cm
* Material: Metal (Brass), ceramics, glass
* Manufacturer: Ernst Schotte & Co.
* Blog post about the object: https://etheritage.ethz.ch/2023/09/20/ein-tellurium-fur-die-schule/?lang=en  
* **Paradata:**
* Modeller: ikonaut
* Date: 2023
* Model type: object
* Method used: Photogrammetry
* Measurement setup: White screen background, Tripod-based camera and lighting, Manual measurement of measurement points on the object.
* Properties of sensors: DSLR, RAW format
* Properties of the 3D data sets: Depthmaps, Mesh object
* Tools used, input data: Agisoft Metashape, Cinema 4D, 3D-Coat.
* Format descriptions, file descriptions: FBX version 7.7 (model without embedded textures), JPG, 8192px, 4096px (texture data).
* Files used, units: FBX JPG

ETH: Tellurium with Lunarium

This is an accurate hard-surface model of the dotApollo, created in Plasticity using physical measurements. Its modular design with removable panels and buttons makes it a perfect base for custom design concepts. This is my first experience in CAD - modeling, so the model might need some adjustments, if you will use it for 3D printing or CNC production. 

E-mail or DM me for STEP - source file, I will provide it for free (you can donate any summ if you want).

Check out some renders of this on my ArtStation: https://www.artstation.com/artwork/gReJVG ; https://www.artstation.com/artwork/a0lyG8

coloss.orders@gmail.com \\ or comment if you are waiting for anwser.

dotApollo by dotmod & Mission XV + Custom

Schedel van een resusaap *(Macaca mulatta)*. Het betreft een jong individu gezien de nog niet geheel doorgekomen snijtanden en het niet volledig vergroeide schedeldak. Gevonden in de Vecht, gemeente Weesp (2011).

*Skull of a rhesus macaque (Macaca mulatta). It concerns a young individual, as indicated by the not yet fully erupted incisors and the not completely fused cranial vault. Found in the River Vecht, municipality of Weesp (2011). *

Afmetingen-measurements (cm): 6.0/9.0/-

<a href="https://hdl.handle.net/21.12153/obj57383">Collectie Archeologiemuseum Huis van Hilde PNH 10397-01</a>

Model by Archeologiemuseum Huis van Hilde (Kees Zwaan).

![](https://collectie.huisvanhilde.nl/imageproxy.aspx?server=10.0.10.211&port=17502&width=600&height=451&filename=images52/images_public/resusaap.jpg)

*Rhesus macaque (Macaca mulatta) by www.dieren3.webnode.nl*

Schedel resusaap | skull of a rhesus monkey.

L/A Meriluoto is one of two ferries operating between Oulunsalo and Hailuoto in the northwestern Finland. She has been operating on the route for 30 years, starting from 1996 and ending in 2026 when the Hailuoto causeway will replace ferry traffic.

Measurements: length: 53.5 m, breadth: 12.3 m, draught: 4.2 m, capacity: approx. 45 cars.

I went with the detailing and color scheme of the ferry in the mid-2010s, since I think the current appearance isn't as visually interesting. Model based on photomatching, not blueprints. Modeling done in Sketchup and then moved into Blender at the last minute, so have fun cleaning up the probably incredible topology and whatnot. Sorry :)

Hailuoto car ferry L/A Meriluoto

Measurements taken from an IKEA ALEX drawer I have in my office.<br>
Each drawer has a position constraint so that it doesn't open more than how it does in real life.

Just trying to get some practice in by modeling things in my office.<br>
Made in Blender 5.0 and exported as an .FBX because I get an Error 13 with the .blend file.<br>

Free to download because I'm not claiming this to be clean, optimized, or ready for anything other than playing around.

IKEA ALEX Drawer 23x14x27

L/A Merisilta is one of two ferries operating between Oulunsalo and Hailuoto in the northwestern Finland. She has been operating on the route for almost 40 years, starting from 1987 and ending in 2026 when the Hailuoto causeway will replace ferry traffic.

Measurements: length: 63.2 m, breadth: 12.3 m, draught: 3.6 m, capacity: approx. 55 cars.

I went with the detailing and color scheme of the ferry in the mid-2010s, since I think the current appearance isn't as visually interesting. Model based on photomatching, not blueprints. Modeling done in Sketchup and then moved into Blender at the last minute, so have fun cleaning up the probably incredible topology and whatnot. Sorry :)

Hailuoto car ferry L/A Merisilta

This model was obtained by applying advanced photogrammetry technologies and cutting edge techniques currently not applied to this field that have allowed me to recreate previously unattainable models like Harbin, Yunxian 2 and now HLD-6. This model represents a reconstruction of the HLD-6 cranium from the Hualongdong paleoanthropological site in Dongzhi County, Anhui Province, China.

The HLD-6 individual lived during the late Middle Pleistocene, approximately 300,000 years ago. Stratigraphic and geochronological studies place the Hualongdong hominin assemblage between roughly 331–275 thousand years ago.

This digital reconstruction was created using published anatomical descriptions and visual references from the study “Craniofacial reconstruction and morphological analysis of the HLD-6 skull” (Acta Anthropologica Sinica, 2025) and scaled using cranial measurements from the supplementary dataset of “The phylogenetic position of the Yunxian cranium elucidates the origin of Homo longi and the Denisovans.”

Hualongdong 6 (HLD-6)

We now know how the pyramids and other exceptional Egyptian structures were built with such extreme precision.
Using AI, it has been possible to reconstruct the view of a surveyor at work:

Here, "TouTanTaké" is taking measurements for precise layout.
Here, the equipment appears to be a "Trimbilus ESS9."
We eagerly await further details on the methods used!

TouTanTake Measure

For complete workflow compatibility, we recommend downloading the original file.The viewer version is intended for web viewing only. In the Original format, the following are fully preserved:✔ native scene structure✔ unsimplified materials✔ proper texture maps✔ proper object namingIf you intend to use the asset in a production environment, download the original version.An Accurate iMac 2021 modelled using reference images and measurements of a real life iMac

Apple Imac 2021

For production-ready use, we recommend downloading the source format.The Converted version is intended only for use in the web viewer. In the source file, the following are fully preserved:✔ original scene hierarchy✔ all materials without simplification✔ correct PBR texture maps✔ original object namesIf you intend to use the asset in a production environment, choose the original version.A 3D model of a long women s dress with a floral design created in Blender. This model features detailed fabric folds and high quality materials making it suitable for use in games animation and rendering. The creation process in Blender involved first taking measurements from the mannequin. For the skirt I started with a plane used the Knife Project tool to cut it then connected the vertices. After that I ran a simulation in Blender to fit the plane onto the mannequin s body forming the skirt. Then I created the top and merged both pieces together.

Princess Gown

Brok zwavel, vermoedelijk afkomstig uit Italië (Sicilië). In 2021 gevonden in een scheepswrak dat rond 1735 verging op de Waddenzee. Het wrak kreeg van de vinders de naam “Zwavelwrak”.

*Chunk of sulfur, probably originating from Italy (Sicily). Found in 2021 in a shipwreck that sank in the Wadden Sea around 1735. The finders named the wreck the “Sulfur Wreck”.*

Afmetingen-measurements (cm): 15.0/10.0/-

<a href="https://hdl.handle.net/21.12153/obj70580">Collectie Archeologiemuseum Huis van Hilde PNH 11617-02</a>

*Model by Archeologiemuseum Huis van Hilde (Kees Zwaan).*

Zwavel | sulfur (ca. 1735)

Brok zwavel, vermoedelijk afkomstig uit Italië (Sicilië). In 2021 gevonden in een scheepswrak dat rond 1735 verging op de Waddenzee. Het wrak kreeg van de vinders de naam “Zwavelwrak”.

*Chunk of sulfur, probably originating from Italy (Sicily). Found in 2021 in a shipwreck that sank in the Wadden Sea around 1735. The finders named the wreck the “Sulfur Wreck”.*

Afmetingen-measurements (cm): 32.0/24.0/-

<a href="https://hdl.handle.net/21.12153/obj70578">Collectie Archeologiemuseum Huis van Hilde PNH 11617-01</a>

*Model by Archeologiemuseum Huis van Hilde (Kees Zwaan).*

For full functionality, we recommend downloading the source format.The Converted version is intended for web viewing only. In the original file, the following are fully preserved:✔ full scene structure✔ all materials without simplification✔ correct PBR texture maps✔ proper object namingIf you plan to use this model in production, select the source file.An old used pressure gauge for 400 bar. Pressure measurement is the analysis of an applied force by a fluid liquid or gas on a surface. the pointer is movable

Pressure Gauge 400 Bar

A traditional hat worn by the peoples of Maderia, Portugal. Originally, worn by rural island workers, its use has since shifted in today's enviornment. In a contemporary enviornment, these hats serve as a visual reminder of the islands rich culture and are used in celebration. 

Processes:
Fulling, Felting

Materials used:
Wool, thread, dye. 

Measurements:
Circumference- 54cm
Base to crown height- 16cm
Tail- 7cm
Total height- 23cm

资源库

关于这些资源